Fujifilm BL01758-200 Manuel D’Utilisation

Menus

Using the Menus: Shooting Mode

 D

 D WHITE BALANCE (Continued)

((default: 

default: AUTO)

h

h

Choose 

h to adjust white balance for unusual lighting conditions.  White balance measure-

ment options will be displayed; frame a white object so that it fi lls the display and press the 
shutter button all the way down to measure white balance.
•  If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
•  If “UNDER” is displayed, raise exposure compensation (

P 49) and try again.

•  If “OVER” is displayed, lower exposure compensation and try again.

 

R For greater precision, adjust P FILM SIMULATION, N ISO, and U DYNAMIC RANGE 

before measuring white balance.

 

R At settings other than 

h

, auto white balance is used with the fl ash.

 

R Results vary with shooting conditions.  Play pictures back after shooting to check colors in 

the display.

k

k: Color Temperature

Color temperature is an objective measure of the color of a light source, expressed in Kelvin 
(K).  Light sources with a color temperature close to that of direct sunlight appear white; light 
sources with a lower color temperature have a yellow or red cast, while those with a higher 
color temperature are tinged with blue.  You can match color temperature to the light source 
as shown in the following table, or choose options that diff er sharply from the color of the 
light source to make pictures “warmer” or “colder”.