Fujifilm S8100 Manuel D’Utilisation

32

Install the supplied software “FinePixViewer” on your PC to view images on it. With “FinePixViewer”, you can transfer images 
from your camera to your PC, manage image files and folders, and order online printing (only for Windows users) etc.
To run this software, you must have the hardware and software described below. Check your system before you begin the 
installation.

• When you install the software, login using a system administrator account (e.g. "Administrator")
• Internet connection is required to use the FinePix Internet Service. However, the software can still be installed even if you do not 

have an Internet connection.

• Operation is not guaranteed on models with an additional USB interface board.
• Windows 95, Windows 98, and Windows NT are not supported.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
• Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use 

an extension cable or connect the camera via a USB hub.

• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the 

connection is faulty.

OS

Windows 98 SE or later

Windows XP or later

Mac OS X or later

CPU

Pentium 200MHz minimum

2GHz Pentium 4 or  better

Power PC, Intel Processor 
loaded

RAM

128MB minimum

512MB or better

256MB minimum

Hard disk space

1GB minimum

2GB or better

600MB minimum

Display

800 x 600 pixels or better, 16-bit 
color or better

1024 x 768 pixels or better, 
Highest (32bit)

800 x 600 pixels or better, 
approx. 32,000 colors or better

External connection terminal

Pre-installed USB port

L310GB.book  Page 32  Thursday, January 17, 2008  9:44 PM