Fujifilm Z20fd Manuel D’Utilisation

K

When the fl ash is used, the camera’s Intelligent Flash system instantly analyzes the scene based on 
such factors as the brightness of the subject, its position in the frame, and its distance from the camera.  
Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed while 
preserving the eff ects of ambient background lighting, even in dimly-lit indoor scenes.  Use the fl ash 
when lighting is poor, for example when shooting at night or indoors under low light.

To choose a fl ash mode, press the selector right (K).  The fl ash mode changes 
each time the selector is pressed; in modes other than AUTO, the current mode 
is indicated by an icon in the monitor.  Choose from the following options (some 
options are not available in all shooting modes; see pg. 106):

AUTO (no icon) The fl ash fi res when required.  Recommended in most situations.

K (fi ll fl ash)

The fl ash fi res whenever a picture is taken.  Use for backlit subjects or for natural coloration 
when shooting in bright light.

W (fl ash off )

The fl ash does not fi re even when the subject is poorly lit.  

0

 will appear in the monitor at slow 

shutter speeds to warn that pictures may be blurred.  Use of a tripod is recommended.

T (slow sync)

Capture both the main subject and the background when shooting at night (note that brightly 
lit scenes may be overexposed).  If D is selected for a SHOOTING MODE, shutter speed may 
be as slow as 3 s.  Use a tripod.

If the fl ash will fi re, X will be displayed in the monitor when the shutter button is pressed halfway.

The fl ash may fi re several times with each shot.  Do not move the camera until shooting is complete.