Fujifilm Z20fd Manuel D’Utilisation
57
Infrared Transmission: The IR Menu
Co
n
n
n
e
c
ti
o
n
s
IR Communication
IR Communication
Still pictures can be copied from the camera to any device that supports high-speed infrared or Ir-
Simple. The camera can receive still pictures from devices that support high-speed infrared or IrSim-
pleShot™ (IRSS™). Before sharing pictures, match the t IR COMMUNICATION option in the camera
setup menu to the infrared transmission type used by the other device (pg. 83). For details, see the
manual provided with the device.
Simple. The camera can receive still pictures from devices that support high-speed infrared or IrSim-
pleShot™ (IRSS™). Before sharing pictures, match the t IR COMMUNICATION option in the camera
setup menu to the infrared transmission type used by the other device (pg. 83). For details, see the
manual provided with the device.
To share pictures, place the camera about 5 to 20 cm (2 to 8 in.) from the other device with the infrared
ports pointing directly at each other. The ports should be at no more than a 15 ° angle. Be sure both
devices are on.
ports pointing directly at each other. The ports should be at no more than a 15 ° angle. Be sure both
devices are on.
Maximum angle:
approximately 15 °
approximately 15 °
Caution
Make sure that there are no obstacles between the two devices and that the infrared ports are correctly aligned
and are not in direct sunlight or directly under a fl uorescent light. Remote controls and other infrared devices and
equipment that generates electrical noise may interfere with transmission.
and are not in direct sunlight or directly under a fl uorescent light. Remote controls and other infrared devices and
equipment that generates electrical noise may interfere with transmission.