Honeywell IV REV B Manuel D’Utilisation

Page de 132
Fusion IV DVR User Guide 
 
________________________________________________________________________________________________________ 
Document 800-05305V1 Rev B 
55 
10/11 
 
Frame Setup 
The Frame Setup menu allows configuration of the IPS, resolution, quality, and 
sensitivity of camera channels. When configuring the IPS sliders the BLUE slider 
represents the IPS the DVR will record during intensive recording and have available for 
transmitting to remotely connected systems. The RED slider represents the IPS that will 
be recorded by the DVR under normal recording conditions.  
The total IPS of all blue sliders may not exceed the recording IPS of the DVR. The IPS of 
a red slider may not exceed that of the blue slider for the same channel. The dual sliders 
allow configuration of the DVR to record at a lower IPS while still being able to transmit 
at a higher IPS to remote connections.  
Ex. If a camera channel is set to 25 IPS (blue) and 7 IPS (red), the DVR will record at 7 
IPS and users viewing live video remotely can receive up to 25 IPS. 
 
Note 
The RED IPS record slider cannot exceed the BLUE IPS capture slider. 
 
Note 
The Software will not allow the maximum available Frames to be exceeded. 
 
Frame Select 
Blue Slider: Sets the IPS recorded during intensive recording and available for viewing 
on a remote client PC. 
Red Slider: Sets the IPS recorded by the DVR during normal recording. 
 
Resolution: 
Affects the total number of frames per second that are available.  
 
Codec: Select the appropriate codec for each camera (MJPEG, MPEG-4, H.264) 
 
Video Quality: 
Lower quality video has a smaller file size but appears more pixilated. 
 
Sensitivity:
 Sets the Keyframe refresh rate. Adjusting this setting can have negative 
effects on video quality.  
Note 
Do not change the default setting unless instructed by a system administrator.