Honeywell IV REV B Manuel D’Utilisation
Setup Options
________________________________________________________________________________________________________
70
70
Activate PTZ Preset on Sensor
Create a PTZ Preset Position. See instructions in the PTZ Setup chapter.
1. Click Setup on the Live View
1. Click Setup on the Live View
screen.
2. Click Sensor.
3. Click Sensor Preset.
4. Select the desired camera
3. Click Sensor Preset.
4. Select the desired camera
from the Channel list.
5. Select the appropriate Sensor
from the list.
6. Select the preconfigured PTZ
Preset from the list.
7. Click Set. A list of configured
Sensor Presets will display in
the box below.
8. Repeat for additional sensors.
9. Click OK to close the Sensor
9. Click OK to close the Sensor
Preset window.
Hybrid Sensor Setup
This interface is used to link Hard Contact Sensor Inputs from supported Network
Devices to the recorder software.
Devices to the recorder software.