Sony 411 Manuel
4
Installation Instructions
Pitch-Adjustable Mount PLP91/D
INSTALL MOUNT
Install the mount as follows:
1.
Determine the exact mounting location prior to installation and
draw a level line to indicate the desired height for the top of the
mounting plate.
draw a level line to indicate the desired height for the top of the
mounting plate.
WARNING: Improper installation can result in serious per-
sonal injury! Make sure that the structural
framework can support a weight factor five times
the total weight of the equipment. If not, reinforce
the structure before installing the mount.
framework can support a weight factor five times
the total weight of the equipment. If not, reinforce
the structure before installing the mount.
2.
With the mount correctly oriented and level, secure the mount
to the wall (see Figure 1) using four fasteners (not included).
Fasteners must be driven into the supporting wall studs or other
supporting framework.
to the wall (see Figure 1) using four fasteners (not included).
Fasteners must be driven into the supporting wall studs or other
supporting framework.
3.
Check mount to ensure it is level and adjust to level if
necessary.
necessary.
INSTALL PSB-91/D DISPLAY BRACKETS
1.
Using a 10-24 button head cap screw inserted from the back
side of the bracket, secure the mounting button, with cham-
fered hole of mounting button (larger surface) facing the
bracket, to bracket (four places) (see Figure 2 and Figure 3).
side of the bracket, secure the mounting button, with cham-
fered hole of mounting button (larger surface) facing the
bracket, to bracket (four places) (see Figure 2 and Figure 3).
2.
Place Nylon spacers over the mounting holes on the back of the
screen.
screen.
Mounting
Holes
Mounting
Holes
Figure 1. Mounting Hole Locations
Figure 2. Mounting Button Attachment
Figure 3. Mounting Button Location
10-24 Button Head
Cap Screw
Attach Mounting Buttons
Using These Holes
Mounting Button