Maxtor 4 Channel Stand-alone DVMR Manuel D’Utilisation
31
CHAP. 5 Set Up
5-7. FACTORY DEFAULT
Set all system elements to the factory default value.
Use the direction buttons to move and press the
[ENTER] button to set. After setting the values to
ON, select RUN, press [ENTER]. If the ALL setting
was configured to ON, then the entire system has
been set to factory default settings. This method is
used to initialize the unit and is required for some
operations, such as firmware upgrades, HDD
installations, and prior to initial setup.
Use the direction buttons to move and press the
[ENTER] button to set. After setting the values to
ON, select RUN, press [ENTER]. If the ALL setting
was configured to ON, then the entire system has
been set to factory default settings. This method is
used to initialize the unit and is required for some
operations, such as firmware upgrades, HDD
installations, and prior to initial setup.
SYSTEM MENU
DISPLAY SETUP
CONFIGURATION
RECORD SETUP
EXTERNAL DEVICE
FACTORY DEFAULT
LANGUAGE ENGLISH
SELECT MENU : ▲▼, & [ENTER]
5-8. LANGUAGE SETUP
The menu can be displayed in a number of languages.
Press [ENTER] button to select your language.
Press [ENTER] button to select your language.
FACTORY DEFAULT
SELECT MENU : ▲ ▼, & [ENTER]
ALL
SCREEN DISPLAY
CAMERA SETTING
MOTION SETUP
PANTILT SERUP
SCHEDULE SETUP
CONFIGURATION
RUN
OFF
OFF
OFF
OFF
OFF
OFF
OFF