Manualsbrain.com
  1. Manuels
  2. Marques
  3. Hitachi
  4. JPEG2000
  5. Manuel D’Utilisation

Hitachi JPEG2000 Manuel D’Utilisation

Télécharger
Page de 80
  JPEG2000 Stand alone DVR User Guide
 
 
- 12 -   
 
2-2-3 Relay output installation
 
 
 
 
 
 
 
  Alarm output can be NO or NC, depending on the settings. 
  NO-COM: the NO and COM terminals are open-circuit, and it’ll become closed-circuit when alarm triggered. 
  NC-COM: the NC and COM terminals are closed-circuit, and it’ll become open-circuit when alarm triggered. 
 
 
2-3 Network and serial port installation
 
2-3-1 Network setup
 
 
 
 
 
 
 
  Connect the network cable to “Ethernet”on back panel. 
  Ethernet Setup between ADSL and Cable is different. For details, please refer to Ch. 7-2 Network installation. 
 
2-3-2 Serial port setup 
 
 
 
 
 
 
 
  User is able to connect the COM port of PC or other device to the DVR through RS232. 
  RS232 settings (baudrate/ parity/ length/ stop bit ) are NOT adjustable.   
The transmission baudrate is 19200bps, length 8 bits, stop bit 1, and the parity is none. 
  ASCII-CODE is 1 BYTE.