Firstech, LLC. CM1000A Manuel D’Utilisation

 

 

- 42 - 

Pin 6 Light Blue/White- Brake 12-volts (+) positive input. This input is used for ignition 

controlled door locks. The proper wire will test 12-volts (+) positive only when the 
foot brake is pressed. 

 
Pin 7 Black /White- Optional sensor (-) negative input. (Instant trigger) 
 

 

CONNECTOR 4 

(Pre-wired L.E.D.)

 

 
Pin 1 Black-L.E.D.- (-) negative output.  
 
Pin 2 Black/White-3-volt L.E.D. (+) positive output. 
 
 

CONNECTOR 5 

(Pre-wired Shock Sensor)

 

 
Pin 1 Black-Shock sensor (-) negative ground input. 
 
Pin 2 White-Shock sensor 2

nd

 stage  (-) negative input. (Instant trigger) 

 
Pin 3 Red-Shock sensor 12-volt (+) positive input. 
 
Pin 4 Yellow-Shock sensor 1

st

 stage (-) negative input. (Warn away)