Firstech, LLC. CM1000A Manuel D’Utilisation

 

 

- 78 - 

 
The channel expander is an add-on module that can be used to expand the existing two 
auxiliary outputs to a total of seven auxiliary outputs. Each one of these seven outputs 
can be individually programmed for pulsed, latched, or timed-latch output. The 
programming of the Channel Expander outputs must be done with the Option 
Programmer; the CompuStar remotes do not have the ability to access these programming 
options.  
 

  

  

  

    

 12v+

3

 Aux1 

In

2

Input 

 GND

1

  

 

 

 12v+

8

Aux 7 ( – )200mA

7

Aux 6 ( – )200mA

6

Aux 5 ( – )200mA

5

Aux 4 ( – )200mA

4

Aux 3 ( – )200mA

3

Aux 2 ( – )200mA

2

Output

Aux 1 ( – )200mA

1

  

  

  

    

 

 

Pin1: This is the ground wire for the Channel Expander. Ground this wire to the vehicle 

chassis. 

 
Pin2: This is the data input wire used to communicate with the CompuStar brain module. 

Connect this wire to the Aux 1 output wire from the CompuStar brain module. 

 
Pin3: This is the 12v constant wire for the Channel Expander. Connect this wire to a 

constant 12v+ source within the vehicle. 

 

 
Pin1: Aux 1, 200mA negative output. 
Pin2: Aux 2, 200mA negative output. 
Pin3: Aux 3, 200mA negative output. 
Pin4: Aux 4, 200mA negative output. 
Pin5: Aux 5, 200mA negative output. 
Pin6: Aux 6, 200mA negative output. 
Pin7: Aux 7, 200mA negative output.