Channel Vision DVR-4N Manuel D’Utilisation

 
 
 
 
 

 

After the connection of power cord and other devices(HDDS) with this DVR, turn the power on. 

 

a. The video signal system (NTSC or PAL) is automatically 

detected. 

b. Power Failure Recovery 

This DVR automatically reverts back to programmed record 

parameters upon power restoration. 

c. If the power key is protected by password, the power on/off 

cannot be executed before input the correct password. 

                           (Refer to the PASSWORD in the SYSTEM menu). 
 
 
 
 
 
 
 

 

 
• If there is no video signal, the video signal system is set to NTSC. Do not input the PAL type video signal or it may 

        cause the DVR’s malfunction. In this case, turn off and on again. 

 

a. Multi display   

 

 
 
 
 
 
 
 

                                             
 
 
The example is display by 16CH DVR   
To change a single camera display to the multi camera, press the MULTI button. 
 
b. Full screen display 
 

 
 
 
 
 
 
 

 
 
Press the desired camera number button to display on the monitor.

17