Fujitsu Siemens Computers LOOX 700 Manuel D’Utilisation
錯誤
! 尚未定義樣式。
A26391-K151-Z120-1-7619, Edition 1
25
Inserting and removing expansion cards
Two slots allow the operation of different expansion cards in your Pocket PC. Possible expansion
cards include memory cards (CF and SD/MMC), GPS cards, GSM/GPRS CompactFlash cards and
LAN cards.
cards include memory cards (CF and SD/MMC), GPS cards, GSM/GPRS CompactFlash cards and
LAN cards.
!
Only use expansion cards suitable for the Pocket-PC.
Inserting and removing memory cards
A slot enables the operation of a memory card of the type "Secure Digital I/O" or "MultiMediaCard".
!
Observe the manufacturer's information when using memory cards.
Never use force when inserting or removing a memory card.
Make sure that no foreign objects enter the slot.
Never use force when inserting or removing a memory card.
Make sure that no foreign objects enter the slot.
2
3
1
►
Also press on the edge of the placeholder (1) so that the placeholder is pushed out of the slot
somewhat.
somewhat.
►
Pull the placeholder out of the Pocket PC (2).
►
Carefully push the memory card (3) into the slot.
The memory card may protrude by one to several millimetres (depending on the memory card type).
i
Keep the placeholder for the memory card in a safe place. When you remove the memory
card again, you should reinsert the memory card placeholder. This prevents foreign matter
from getting into the slot.
card again, you should reinsert the memory card placeholder. This prevents foreign matter
from getting into the slot.