Polycom DOC2702A Manuel D’Utilisation
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
3-26
Polycom, Inc.
Participant Settings
When defining a new participant or modifying an existing participant, select SIP as the
participant’s networking environment Type in the New Participant or Participant Properties -
General tab.
The participants Video Protocol in the New Participant or Participant Properties - Advanced tab
should be left at (or set to) its default value: Auto.
The Auto setting allows the video protocol to be negotiated according to the endpoint’s
The Auto setting allows the video protocol to be negotiated according to the endpoint’s
capabilities:
•
•
OCS endpoints and Lync Server clients connect to the conference using the RTV
protocol.
•
Other endpoints negotiate the video protocol in the following sequence: H.264,
followed by RTV, followed by H.263 and finally H.261.
Protocol Forcing
Selecting H.264, RTV, H.263 or H.261 as the Video Protocol results in endpoints that do not
Selecting H.264, RTV, H.263 or H.261 as the Video Protocol results in endpoints that do not
support the selected Video Protocol connecting as Secondary (audio only).
SIP