Polycom DOC2702A Manuel D’Utilisation

Chapter 19-Gateway Calls

Polycom, Inc.

When the flag is set to NO (default), if the Gatekeeper is not functioning, the RMX dials to the 

endpoint using the endpoint’s IP address configured in the IP Address field of the New 

Participant/Participant Properties - General dialog box. 

If no IP address is defined in the Participant Properties, the call will fail.
The method by which calls are dialed out to the endpoint is dependant on the flag value and 

the availability of the Gatekeeper as summarized in the following table:

For Dial-in calls, direct IP dialing is enabled or disabled by the 

GK_MANDATORY_FOR_CALLS_IN and System Flag. 
When the flag is set to NO (default), if the Gatekeeper is not functioning, calls from endpoints 

will be connected directly to the Entry Queue, Conference or Meeting Room that was dialed. 
The method by which dial-in calls are accepted or rejected is dependant on the flag value 

and the availability of the Gatekeeper as summarized in Table 19-2:

NO

Dial out to endpoint IP Address bypassing the Gatekeeper.

YES

Dial out to endpoint Alias Name using the Gatekeeper.

NO

No dial out to endpoint.

YES

Dial out to endpoint Alias Name using the Gatekeeper.

NO

Dial-in call is connected bypassing the Gatekeeper.

YES

Dial-in call is connected using the Gatekeeper.

NO

Dial-in call is rejected.