Polycom DOC2702A Manuel D’Utilisation
Chapter 20-RMX Manager Application
Polycom, Inc.
20-19
To start monitoring again, click the check box in the Monitored column in the MCUs pane, or
right-clicking the MCU icon and selecting Start Monitoring.
Modifying the MCU Properties
You can view the currently defined MCU settings, and modify them when required, for
example, change the MCU name, IP address or Secured mode.
Use this procedure to add the Username and Password to the properties of the MCU that was
Use this procedure to add the Username and Password to the properties of the MCU that was
automatically added to the MCU list when installing the RMX Manager. This enables
automatic login when connecting the MCU to the RMX Manager.
You can modify the MCU properties when the MCU is connected or disconnected.
To view and/or modify the MCU Properties:
1
You can modify the MCU properties when the MCU is connected or disconnected.
To view and/or modify the MCU Properties:
1
Use one of the following methods:
a
Select the MCU to disconnect and click the MCU Properties
button.
b
Right-click the MCU icon and then click MCU Properties.
The MCU Properties dialog box opens.
2
Define/modify the required parameters. For details, see “MCU Properties” on page
.
3
Click OK.
Disconnecting an MCU
An MCU can be disconnected from the RMX Manager, without removing it from the MCUs
list.
To disconnect an MCU:
1
To disconnect an MCU:
1
Use one of the following methods:
a
Select the MCU to disconnect and click the Disconnect MCU
button.