Polycom DOC2702A Manuel D’Utilisation

Appendix H-Setting the MCU for Integration Into Microsoft Environment

Polycom, Inc.

View or modify the following fields: 

Click OK.

Your RMX 1500/2000/4000 system should be installed according to standard installation 

procedures. For details, see the RealPresence Collaboration Server (RMX) 1500/2000/4000 

Getting Started Guide.
When configuring the Default IP Network Service on first entry, or when modifying the 

properties of the existing Default IP Network Service, the SIP environment parameters must be 

set as described in this section.

There are two methods to create and send the security certificate that is required for 

configuration of the integration of the MCU in the Microsoft environment:
•

The CSR method (recommended method for Microsoft Office Communications Server, 

Wave 13)

•

The PFX method (Recommended method for Lync Server, Wave 14)

Enter the name of the MCU on the network. This name must be 
identical to the FQDN name defined for the MCU in the OCS and 
DNS.
Default name is MCU.

Displays the name of the entity that manages the MCU hardware. 
The name is derived from the MCU host name. Default is RMX_SHM.

Select:

•

Off – if DNS servers are not used in the network.

•

Specify – to enter the IP addresses of the DNS servers. 

Note: The IP address fields are enabled only if Specify is selected.

Select this option to automatically register the MCU Signaling Host 
and Shelf Management with the DNS server.

Enter the name of the domain where the MCU is installed as defined 
in the Office Communications Server/Lync Server.

The static IP addresses of the DNS servers (the same servers 
defined in the Office Communications Server/Lync Server). 
A maximum of three servers can be defined.