AGFA HE/001132 Manuel D’Utilisation
HE/001132
Page 32 of 92
Document No. 001132, Revision 2.0
Agfa HealthCare
NodeID Livelink : 14140190
14 June, 2007
Table 2.2-16: Storage Commitment N-EVENT-REPORT Behavior
Event Type Name
Event Type
ID
ID
Behavior
Storage Commitment Request
Successful
Successful
1
The job will be marked as SUCCESSFUL
Storage Commitment Request
Complete – Failure exists
Complete – Failure exists
2
The job will be marked as FAILED.
The reasons for returning specific status codes in a N-EVENT-REPORT response are summarized in the
table below:
table below:
Table 2.2-17: Storage Commitment N-EVENT-REPORT Response Status Reasons
Service
Status
Status
Further Meaning
status Code
Reasons
Success
0000
The SCP has successfully returned all matching
information.
information.
The behavior of the DICOM Store AE when receiving Event types over this association is the same as when
receiving them over the same association as documented in section 2.2.1.3.1.3.2
receiving them over the same association as documented in section 2.2.1.3.1.3.2
2.2.1.4.1.4
SOP Specific Conformance – Verification SOP Class
(1.2.840.10008.1.1)
The Storage AE provides standard conformance to the Verification SOP Class as an SCP. This verification is
accomplished on an established Association using the C-ECHO DIMSE-C service.
accomplished on an established Association using the C-ECHO DIMSE-C service.
These tests can be executed in the "Workstation Service & Configuration Tool".
The Configuration Tool opens an association when testing of a remote application is requested during a
configuration session. This can be done when entering new data for remote application configuration or to
verify existing configuration data using the C-ECHO DIMSE-C service.
The Configuration Tool opens an association when testing of a remote application is requested during a
configuration session. This can be done when entering new data for remote application configuration or to
verify existing configuration data using the C-ECHO DIMSE-C service.