Manuels d'utilisation pour Netgear GSM7328Sv2 - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch

Netgear

Manuel De L’Administrateur (English)

Manuel De L’Administrateur

Table des matières

ProSafe 7000 Managed Switch Release 8.0.3
1
Table of Contents
3
1. Documentation Resources
8
2. VLANs
9
- Create Two VLANs
  10
  - CLI: Create Two VLANS
    10
  - Web Interface: Create Two VLANS
    10
- Assign Ports to VLAN2
  12
  - CLI: Assign Ports to VLAN2
    12
  - Web Interface: Assign Ports to VLAN2
    12
- Assign Ports to VLAN3
  13
  - CLI: Assign Ports to VLAN3
    13
  - Web Interface: Assign Ports to VLAN3
    14
- Assign VLAN3 as the Default VLAN for Port 1/0/2
  15
  - CLI: Assign VLAN3 as the Default VLAN for Port 1/0/2
    15
  - Web Interface: Assign VLAN3 as the Default VLAN for Port 1/0/2
    15
- Create a MAC-Based VLAN
  16
  - CLI: Create a MAC-Based VLAN
    16
  - Web Interface: Assign a MAC-Based VLAN
    17
- Create a Protocol-Based VLAN
  19
  - CLI: Create a Protocol-Based VLAN
    19
  - Web Interface: Create a Protocol-Based VLAN
    20
- Virtual VLANs: Create an IP Subnet–Based VLAN
  21
  - CLI: Create an IP Subnet–Based VLAN
    22
  - Web Interface: Create an IP Subnet–Based VLAN
    23
- Voice VLANs
  24
  - CLI: Configure Voice VLAN and Prioritize Voice Traffic
    25
  - Web Interface: Configure Voice VLAN and Prioritize Voice Traffic
    27
3. LAG s
34
- Create Two LAGs
  35
  - CLI: Create Two LAGs
    35
  - Web Interface: Create Two LAGs
    35
- Add Ports to LAGs
  36
  - CLI: Add Ports to the LAGs
    36
  - Web Interface: Add Ports to LAGs
    37
- Enable Both LAGs
  38
  - CLI: Enable Both LAGs
    38
  - Web Interface: Enable Both LAGs
    38
4. Port Routing
39
- Port Routing Configuration
  40
- Enable Routing for the Switch
  41
  - CLI: Enable Routing for the Switch
    41
  - Web Interface: Enable Routing for the Switch
    41
- Enable Routing for Ports on the Switch
  41
  - CLI: Enable Routing for Ports on the Switch
    42
  - Web Interface: Enable Routing for Ports on the Switch
    42
- Add a Default Route
  44
  - CLI: Add a Default Route
    44
  - Web Interface: Add a Default Route
    44
- Add a Static Route
  45
  - CLI: Add a Static Route
    45
  - Web Interface: Add a Static Route
    46
5. VLAN Routing
47
- Create Two VLANs
  47
  - CLI: Create Two VLANs
    48
  - Web Interface: Create Two VLANs
    49
- Set Up VLAN Routing for the VLANs and the Switch
  52
  - CLI: Set Up VLAN Routing for the VLANs and the Switch
    52
  - Web Interface: Set Up VLAN Routing for the VLANs and the Switch
    53
6. RIP
54
- Routing for the Switch
  55
  - CLI: Enable Routing for the Switch
    55
  - Web Interface: Enable Routing for the Switch
    55
- Routing for Ports
  56
  - CLI: Enable Routing and Assigning IP Addresses for Ports 1/0/2 and 1/0/3
    56
  - Web Interface: Enable Routing for the Ports
    56
- RIP for the Switch
  57
  - CLI: Enable RIP on the Switch
    57
  - Web Interface: Enableg RIP on the Switch
    58
- RIP for Ports 1/0/2 and 1/0/3
  58
  - CLI: Enable RIP for Ports 1/0/2 and 1/0/3
    58
  - Web Interface: Enable RIP for Ports 1/0/2 and 1/0/3
    59
- VLAN Routing with RIP
  60
  - CLI: Configure VLAN Routing with RIP Support
    60
  - Web Interface: Configure VLAN Routing with RIP Support
    62
7. OSPF
64
- Inter-area Router
  65
  - CLI: Configure an Inter-area Router
    65
  - Web Interface: Configure an Inter-area Router
    67
- OSPF on a Border Router
  70
  - CLI: Configure OSPF on a Border Router
    70
  - Web Interface: Configure OSPF on a Border Router
    71
- Stub Areas
  75
- nssa Areas
  84
- VLAN Routing OSPF
  93
  - CLI: Configure VLAN Routing OSPF
    94
  - Web Interface: Configure VLAN Routing OSPF
    95
- OSPFv3
  98
  - CLI: Configure OSPFv3
    98
  - Web Interface: Configure OSPFv3
    100
8. ARP
103
- Proxy ARP Examples
  103
9. VRRP
105
- VRRP on a Master Router
  106
  - CLI: Configure VRRP on a Master Router
    106
  - Web Interface: Configure VRRP on a Master Router
    107
- VRRP on a Backup Router
  108
  - CLI: Configure VRRP on a Backup Router
    108
  - Web Interface: Configure VRRP on a Backup Router
    109
10. ACLs
111
- MAC ACLs
  112
- IP ACLs
  112
- ACL Configuration
  112
- Set Up an IP ACL with Two Rules
  113
  - CLI: Set Up an IP ACL with Two Rules
    113
  - Web Interface: Set Up an IP ACL with Two Rules
    114
- One-Way Access Using a TCP Flag in an ACL
  117
  - CLI:Configure One-Way Access Using a TCP Flag in an ACL
    117
  - Web Interface: Configure One-Way Access Using a TCP Flag in an ACL
    121
- Use ACLs to Configure Isolated VLANs on a Layer 3 Switch
  132
  - CLI: Configure One-Way Access Using a TCP Flag in ACL Commands
    133
  - Web Interface: Configure One-Way Access Using a TCP Flag in an ACL
    135
- Set up a MAC ACL with Two Rules
  144
  - CLI: Set up a MAC ACL with Two Rules
    144
  - Web Interface: Set up a MAC ACL with Two Rules
    145
- ACL Mirroring
  147
  - CLI: Configure ACL Mirroring
    147
  - Web Interface: Configure ACL Mirroring
    148
- ACL Redirect
  152
  - CLI: Redirect a Traffic Stream
    152
  - Web Interface: Redirect a Traffic Stream
    153
- Configure IPv6 ACLs
  157
  - CLI: Configure an IPv6 ACL
    158
  - Web Interface: Configure an IPv6 ACL
    160
11. CoS Queuing
164
- CoS Queue Mapping
  165
  - Trusted Ports
    165
  - Untrusted Ports
    165
- CoS Queue Configuration
  166
- Show classofservice Trust
  166
  - CLI: Show classofservice Trust
    166
  - Web Interface: Show classofservice Trust
    167
- Set classofservice Trust Mode
  167
  - CLI: Set classofservice Trust Mode
    167
  - Web Interface: Set classofservice Trust Mode
    167
- Show classofservice IP-Precedence Mapping
  168
  - CLI: Show classofservice IP-Precedence Mapping
    168
  - Web Interface: Show classofservice ip-precedence Mapping
    168
- Configure Cos-queue Min-bandwidth and Strict Priority Scheduler Mode
  169
  - CLI: Configure Cos-queue Min-bandwidth and Strict Priority Scheduler Mode
    169
  - Web Interface: Configure CoS-queue Min-bandwidth and Strict Priority Scheduler Mode
    169
- Set CoS Trust Mode for an Interface
  170
  - CLI: Set CoS Trust Mode for an Interface
    171
  - Web Interface: Set CoS Trust Mode for an Interface
    171
- Configure Traffic Shaping
  171
  - CLI: Configure traffic-shape
    172
  - Web Interface: Configure Traffic Shaping
    172
12. DiffServ
173
- DiffServ
  174
  - CLI: Configure DiffServ
    175
  - Web Interface: Configure DiffServ
    177
- DiffServ for VoIP
  190
  - CLI: Configure DiffServ for VoIP
    190
  - Web Interface: Diffserv for VoIP
    192
- Auto VoIP
  197
  - CLI: Configure Auto VoIP
    198
  - Web Interface: Configure Auto-VoIP
    200
- DiffServ for IPv6
  201
  - CLI: Configure DiffServ for IPv6
    201
  - Web Interface: Configure DiffServ for IPv6
    202
- Color Conform Policy
  208
  - CLI: Configure a Color Conform Policy
    208
  - Web Interface: Configure a Color Conform Policy
    209
13. IGMP Snooping and Querier
216
- IGMP Snooping
  216
  - CLI: Enable IGMP Snooping
    216
  - Web Interface: Enable IGMP Snooping
    217
- Show igmpsnooping
  217
  - CLI: Show igmpsnooping
    217
  - Web Interface: Show igmpsnooping
    218
- Show mac-address-table igmpsnooping
  218
  - CLI: Show mac-address-table igmpsnooping
    218
  - Web Interface: Show mac-address-table igmpsnooping
    219
- External Multicast Router
  219
  - CLI: Configure the Switch with an External Multicast Router
    219
  - Web Interface: Configure the Switch with an External Multicast Router
    220
- Multicast Router Using VLAN
  220
  - CLI: Configure the Switch with a Multicast Router Using VLAN
    220
  - Web Interface: Configure the Switch with a Multicast Router Using VLAN
    221
- IGMP Querier
  221
- Enable IGMP Querier
  222
  - CLI: Enable IGMP Querier
    222
  - Web Interface: Enable IGMP Querier
    223
- Show IGMP Querier Status
  225
  - CLI: Show IGMP Querier Status
    225
  - Web Interface: Show IGMP Querier Status
    225
14. Security Management
226
- Port Security
  226
- Set the Dynamic and Static Limit on Port 1/0/1
  227
  - CLI: Set the Dynamic and Static Limit on Port 1/0/1
    227
  - Web Interface: Set the Dynamic and Static Limit on Port 1/0/1
    228
- Convert the Dynamic Address Learned from 1/0/1 to a Static Address
  229
  - CLI: Convert the Dynamic Address Learned from 1/0/1 to the Static Address
    229
  - Web Interface: Convert the Dynamic Address Learned from 1/0/1 to the Static Address
    229
- Create a Static Address
  230
  - CLI: Create a Static Address
    230
  - Web Interface: Create a Static Address
    230
- Protected Ports
  230
  - CLI: Configure a Protected Port to Isolate Ports on the Switch
    231
  - Web Interface: Configure a Protected Port to Isolate Ports on the Switch
    233
- 802.1x Port Security
  237
  - CLI: Authenticating dot1x Users by a RADIUS Server
    237
  - Web Interface: Authenticating dot1x Users by a RADIUS Server
    238
- Create a Guest VLAN
  243
  - CLI: Create a Guest VLAN
    244
  - Web Interface: Create a Guest VLAN
    245
- Assign VLANs Using RADIUS
  248
  - CLI: Assign VLANS Using RADIUS
    249
  - Web Interface: Assign VLANS Using RADIUS
    251
- Dynamic ARP Inspection
  254
  - CLI: Configure Dynamic ARP Inspection
    255
  - Web Interface: Configure Dynamic ARP Inspection
    256
- Static Mapping
  260
  - CLI: Configure Static Mapping
    260
  - Web Interface: Configure Static Mapping
    261
- DHCP Snooping
  262
  - CLI: Configure DHCP Snooping
    262
  - Web Interface: Configure DHCP Snooping
    263
- Enter Static Binding into the Binding Database
  265
  - CLI: Enter Static Binding into the Binding Database
    265
  - Web Interface: Enter Static Binding into the Binding Database
    266
- Maximum Rate of DHCP Messages
  266
  - CLI: Configure the Maximum Rate of DHCP Messages
    267
  - Web Interface: Configure the Maximum Rate of DHCP Messages
    267
- IP Source Guard
  268
  - CLI: Configure Dynamic ARP Inspection
    268
  - Web Interface: Configure Dynamic ARP Inspection
    269
15. SNTP
273
- Show SNTP (CLI Only)
  273
  - show sntp
    273
  - show sntp client
    274
  - show sntp server
    274
- Configure SNTP
  275
  - CLI: Configure SNTP
    275
  - Web Interface: Configure SNTP
    276
- Set the Time Zone (CLI Only)
  277
- Set the Named SNTP Server
  277
  - CLI: Set the Named SNTP Server
    278
  - Web Interface: Set the Named SNTP Server
    278
16. Tools
280
- Traceroute
  280
  - CLI: Traceroute
    281
  - Web Interface: Traceroute
    282
- Configuration Scripting
  282
  - script
    283
  - script list and script delete
    283
  - script apply running-config.scr
    284
  - Create a Configuration Script
    284
  - Upload a Configuration Script
    284
- Pre-Login Banner
  285
  - Create a Pre-Login Banner (CLI Only)
    285
- Port Mirroring
  286
  - CLI: Specify the Source (Mirrored) Ports and Destination (Probe)
    286
  - Web Interface: Specify the Source (Mirrored) Ports and Destination (Probe)
    287
- Dual Image
  287
  - CLI: Download a Backup Image and Make It Active
    288
  - Web Interface: Download a Backup Image and Make It Active
    289
- Outbound Telnet
  290
17. Syslog
294
- Show Logging
  295
  - CLI: Show Logging
    295
  - Web Interface: Show Logging
    295
- Show Logging Buffered
  297
  - CLI: Show Logging Buffered
    297
  - Web Interface: Show Logging Buffered
    298
- Show Logging Traplogs
  298
  - CLI: Show Logging Traplogs
    298
  - Web Interface: Show Logging Trap Logs
    298
- Show Logging Hosts
  299
  - CLI: Show Logging Hosts
    299
  - Web Interface: Show Logging Hosts
    300
- Configure Logging for a Port
  300
  - CLI: Configure Logging for the Port
    300
  - Web Interface: Configure Logging for the Port
    301
18. Switch Stacks
302
- Switch Stack Management and Connectivity
  302
- The Stack Master and Stack Members
  303
  - Stack Master
    303
  - Stack Members
    304
  - Stack Member Numbers
    304
  - Stack Member Priority Values
    305
- Install and Power-up a Stack
  305
  - Compatible Switch Models
    305
  - Install a Switch Stack
    306
- Switch Firmware
  306
- Configure a Stacking Port as an Ethernet Port
  308
  - CLI: Configure a Stacking Port as an Ethernet Port
    309
  - Web Interface: Configure a Stacking Port as an Ethernet Port
    310
- Stack Switches Using 10G Fiber
  311
  - CLI: Stack Switches Using 10G Fiber
    312
  - Web Interface: Stack Switches Using 10G Fiber
    313
- Add, Remove, or Replace a Stack Member
  314
- Switch Stack Configuration Files
  316
- Preconfigure a Switch
  317
- Renumber Stack Members
  318
  - CLI: Renumber Stack Members
    318
  - Web Interface: Renumber Stack Members
    319
- Move the Stack Master to a Different Unit
  320
  - CLI: Move the Stack Master to a Different Unit
    320
  - Web Interface: Move the Stack Master to a Different Unit
    320
19. SNMP
321
- Add a New Community
  321
  - CLI: Add a New Community
    321
  - Web Interface: Add a New Community
    322
- Enable SNMP Trap
  322
  - CLI: Enable SNMP Trap
    322
  - Web Interface: Enable SNMP Trap
    323
- SNMP V3
  323
  - CLI: Configure SNMP V3
    324
  - Web Interface: Configure SNMP V3
    324
- sFlow
  325
  - CLI: Configure Statistical Packet-Based Sampling of Packet Flows with sFlow
    326
  - Web Interface: Configure Statistical Packet-based Sampling with sFlow
    327
- Time-Based Sampling of Counters with sFlow
  329
  - CLI: Configure Time-Based Sampling of Counters with sFlow
    329
  - Web Interface: Configure Time-Based Sampling of Counters with sFlow
    329
20. DNS
330
- Specify Two DNS Servers
  330
  - CLI: Specify Two DNS Servers
    330
  - Web Interface: Specify Two DNS Servers
    331
- Manually Add a Host Name and an IP Address
  331
  - CLI: Manually Add a Host Name and an IP Address
    331
  - Web Interface: Manually Add a Host Name and an IP Address
    332
21. DHCP Server
333
- Configure a DHCP Server in Dynamic Mode
  333
  - CLI: Configure a DHCP Server in Dynamic Mode
    333
  - Web Interface: Configure a DHCP Server in Dynamic Mode
    334
- Configure a DHCP Reservation
  336
  - CLI: Configure a DHCP Reservation
    337
  - Web Interface: Configure a DHCP Reservation
    337
22. Double VLANs and Private VLAN Groups
339
- Double VLANs
  339
  - CLI: Enable a Double VLAN
    340
  - Web Interface: Enable a Double VLAN
    340
- Private VLAN Groups
  343
  - CLI: Create a Private VLAN Group
    345
  - Web Interface: Create a Private VLAN Group
    346
23. Spanning Tree Protocol
350
- Configure Classic STP (802.1d)
  350
  - CLI: Configure Classic STP (802.1d)
    350
  - Web Interface: Configure Classic STP (802.1d)
    351
- Configure Rapid STP (802.1w)
  352
  - CLI: Configure Rapid STP (802.1w)
    352
  - Web Interface: Configure Rapid STP (802.1w)
    352
- Configure Multiple STP (802.1s)
  353
  - CLI: Configure Multiple STP (802.1s)
    353
  - Web Interface: Configure Multiple STP (802.1s)
    354
24. Tunnel
356
- CLI: Create a Tunnel
  357
  - Configure Switch GSM7328S_1
    357
  - Configure Switch GSM7328S_2
    358
- Web Interface: Create a Tunnel
  359
  - Configure Switch GSM7328S_1
    359
  - Configure Switch GSM7328S_2
    361
25. IPv6 Interface Configuration
364
- Create an IPv6 Routing Interface
  364
  - CLI: Create an IPv6 Routing Interface
    364
  - Web Interface: Create an IPv6 Routing Interface
    365
- Create an IPv6 Network Interface
  366
  - CLI: Configure the IPv6 Network Interface
    367
  - Web Interface: Configure the IPv6 Network Interface
    367
- Create an IPv6 Routing VLAN
  368
  - CLI: Create an IPv6 Routing VLAN
    368
  - Web Interface: Create an IPv6 VLAN Routing Interface
    370
26. PIM
373
- PIM-DM
  373
  - CLI: Configure PIM-DM
    375
  - Web Interface: Configure PIM-DM
    379
- PIM-SM
  397
  - CLI: Configure PIM-SM
    398
  - Web Interface: Configure PIM-SM
    402
27. DHCP L2 Relay and L3 Relay
424
- DHCP L2 Relay
  424
  - CLI: Enable DHCP L2 Relay
    425
  - Web Interface: Enable DHCP L2 Relay
    426
- DHCP L3 Relay
  430
  - CLI: Configure a DHCP Server
    430
  - Web Interface: Configure a DHCP Server
    431
- Confige a DHCP L3 Relay
  434
  - CLI: Configure a DHCP L3 Relay
    434
  - Web Interface: Configure a DHCP L3 Relay
    435
28. MLD
438
- Configure MLD
  439
  - CLI: Configure MLD
    439
  - Web Interface: Configure MLD
    441
- MLD Snooping
  452
  - CLI: Configure MLD Snooping
    453
  - Web Interface: Configure MLD Snooping
    454
29. DVMRP
457
- CLI: Configure DVMRP
  458
- Web Interface: Configure DVMRP
  464
30. Captive Portal
475
- Captive Portal Configuration
  476
- Enable Captive Portal
  476
  - CLI: Enable Captive Portal
    476
  - Web Interface: Enable Captive Portal
    477
- Client Access, Authentication, and Control
  478
- Block a Captive Portal Instance
  479
  - CLI: Block a Captive Portal Instance
    479
  - Web Interface: Block a Captive Portal Instance
    479
- Local Authorization, Create Users and Groups
  479
  - CLI: Create Users and Groups
    480
  - Web Interface: Create Users and Groups
    480
- Remote Authorization (RADIUS) User Configuration
  481
  - CLI: Configure RADIUS as the Verification Mode
    482
  - Web Interface: Configure RADIUS as the Verification Mode
    483
- SSL Certificates
  483
Index
484

Manuel De L’Administrateur

Taille:

12 Mo
Pages:

486
Language:

English

Ouvrir le manuel