Manuels d'utilisation pour TP-LINK tl-sl5428e

TP-LINK

Fiche De Données (English)Manuel D’Utilisation (English)Manuel D’Utilisation (English)Manuel D’Utilisation (English)Manuel D’Utilisation (English)Manuel D’Utilisation (English)

Fiche De Données

Table des matières

Package Contents
11
Chapter 1 About This Guide
12
- 1.1 Intended Readers
  12
- 1.2 Conventions
  12
- 1.3 Overview of This Guide
  12
Chapter 2 Introduction
17
- 2.1 Overview of the Switch
  17
- 2.2 Main Features
  17
- 2.3 Appearance Description
  18
  - 2.3.1 Front Panel
    18
  - 2.3.2 Rear Panel
    19
Chapter 3 Login to the Switch
20
- 3.1 Login
  20
- 3.2 Configuration
  22
Chapter 4 System
24
- 4.1 System Info
  24
  - 4.1.1 System Summary
    24
  - 4.1.2 Device Description
    26
  - 4.1.3 System Time
    26
  - 4.1.4 Daylight Saving Time
    27
  - 4.1.5 System IP
    28
  - 4.1.6 System IPv6
    30
- 4.2 User Management
  38
  - 4.2.1 User Table
    38
  - 4.2.2 User Config
    38
- 4.3 System Tools
  40
  - 4.3.1 Config Restore
    40
  - 4.3.2 Config Backup
    40
  - 4.3.3 Firmware Upgrade
    41
  - 4.3.4 System Reboot
    42
  - 4.3.5 System Reset
    42
- 4.4 Access Security
  42
  - 4.4.1 Access Control
    42
  - 4.4.2 SSL Config
    44
  - 4.4.3 SSH Config
    45
Chapter 5 Switching
52
- 5.1 Port
  52
  - 5.1.1 Port Config
    52
  - 5.1.2 Port Mirror
    53
  - 5.1.3 Port Security
    54
  - 5.1.4 Port Isolation
    56
  - 5.1.5 Loopback Detection
    56
- 5.2 LAG
  58
  - 5.2.1 LAG Table
    59
  - 5.2.2 Static LAG
    60
  - 5.2.3 LACP Config
    61
- 5.3 Traffic Monitor
  63
  - 5.3.1 Traffic Summary
    63
  - 5.3.2 Traffic Statistics
    64
- 5.4 MAC Address
  65
  - 5.4.1 Address Table
    66
  - 5.4.2 Static Address
    67
  - 5.4.3 Dynamic Address
    68
  - 5.4.4 Filtering Address
    70
Chapter 6 VLAN
72
- 6.1 802.1Q VLAN
  73
  - 6.1.1 VLAN Config
    74
  - 6.1.2 Port Config
    76
- 6.2 MAC VLAN
  78
  - 6.2.1 MAC VLAN
    79
  - 6.2.2 Port Enable
    80
- 6.3 Protocol VLAN
  80
  - 6.3.1 Protocol VLAN
    81
  - 6.3.2 Protocol Template
    82
  - 6.3.3 Port Enable
    83
- 6.4 Application Example for 802.1Q VLAN
  83
- 6.5 Application Example for MAC VLAN
  85
- 6.6 Application Example for Protocol VLAN
  86
- 6.7 VLAN VPN
  88
  - 6.7.1 VPN Config
    89
  - 6.7.2 VLAN Mapping
    89
  - 6.7.3 Port Enable
    90
- 6.8 Private VLAN
  92
  - 6.8.1 PVLAN Config
    95
  - 6.8.2 Port Config
    96
- 6.9 GVRP
  98
- 6.10 Application Example for Private VLAN
  101
Chapter 7 Spanning Tree
104
- 7.1 STP Config
  108
  - 7.1.1 STP Config
    108
  - 7.1.2 STP Summary
    110
- 7.2 Port Config
  111
- 7.3 MSTP Instance
  112
  - 7.3.1 Region Config
    112
  - 7.3.2 Instance Config
    113
  - 7.3.3 Instance Port Config
    114
- 7.4 STP Security
  116
  - 7.4.1 Port Protect
    116
  - 7.4.2 TC Protect
    118
- 7.5 Application Example for STP Function
  119
Chapter 8 Ethernet OAM
123
- 8.1 Basic Config
  126
  - 8.1.1 Basic Config
    126
  - 8.1.2 Discovery Info
    127
- 8.2 Link Monitoring
  130
- 8.3 RFI
  131
- 8.4 Remote Loopback
  132
- 8.5 Statistics
  133
  - 8.5.1 Statistics
    133
  - 8.5.2 Event Log
    134
- 8.6 DLDP
  135
- 8.7 Application Example for DLDP
  138
Chapter 9 Multicast
141
- 9.1 IGMP Snooping
  145
  - 9.1.1 Snooping Config
    146
  - 9.1.2 VLAN Config
    147
  - 9.1.3 Port Config
    148
  - 9.1.4 IP-Range
    150
  - 9.1.5 Multicast VLAN
    151
  - 9.1.6 Static Multicast IP
    153
  - 9.1.7 Packet Statistics
    154
  - 9.1.8 Querier Config
    155
- 9.2 MLD Snooping
  157
  - 9.2.1 Global Config
    159
  - 9.2.2 VLAN Config
    160
  - 9.2.3 Filter Config
    162
  - 9.2.4 Port Config
    163
  - 9.2.5 Static Multicast
    163
  - 9.2.6 Querier Config
    164
  - 9.2.7 Packet Statistics
    165
- 9.3 Multicast Table
  166
  - 9.3.1 IPv4 Multicast Table
    166
  - 9.3.2 IPv6 Multicast Table
    167
Chapter 10 QoS
169
- 10.1 DiffServ
  172
  - 10.1.1 Port Priority
    172
  - 10.1.2 DSCP Priority
    173
  - 10.1.3 802.1P/CoS Mapping
    174
  - 10.1.4 Schedule Mode
    175
- 10.2 Bandwidth Control
  176
  - 10.2.1 Rate Limit
    176
  - 10.2.2 Storm Control
    177
- 10.3 Voice VLAN
  179
  - 10.3.1 Global Config
    181
  - 10.3.2 Port Config
    181
  - 10.3.3 OUI Config
    183
Chapter 11 ACL
185
- 11.1 Time-Range
  185
  - 11.1.1 Time-Range Summary
    185
  - 11.1.2 Time-Range Create
    186
  - 11.1.3 Holiday Config
    187
- 11.2 ACL Config
  187
  - 11.2.1 ACL Summary
    187
  - 11.2.2 ACL Create
    188
  - 11.2.3 MAC ACL
    188
  - 11.2.4 Standard-IP ACL
    189
  - 11.2.5 Extend-IP ACL
    190
- 11.3 Policy Config
  192
  - 11.3.1 Policy Summary
    192
  - 11.3.2 Policy Create
    193
  - 11.3.3 Action Create
    193
- 11.4 Policy Binding
  194
  - 11.4.1 Binding Table
    194
  - 11.4.2 Port Binding
    195
  - 11.4.3 VLAN Binding
    195
- 11.5 Application Example for ACL
  196
Chapter 12 Network Security
199
- 12.1 IP-MAC Binding
  199
  - 12.1.1 Binding Table
    199
  - 12.1.2 Manual Binding
    200
  - 12.1.3 ARP Scanning
    201
  - 12.1.4 DHCP Snooping
    203
- 12.2 ARP Inspection
  208
  - 12.2.1 ARP Detect
    212
  - 12.2.2 ARP Defend
    213
  - 12.2.3 ARP Statistics
    214
- 12.3 IP Source Guard
  215
- 12.4 DoS Defend
  216
  - 12.4.1 DoS Defend
    218
  - 12.4.2 DoS Detect
    219
- 12.5 802.1X
  219
  - 12.5.1 Global Config
    223
  - 12.5.2 Port Config
    225
  - 12.5.3 Radius Server
    226
- 12.6 PPPoE Config
  227
Chapter 13 SNMP
230
- 13.1 SNMP Config
  232
  - 13.1.1 Global Config
    232
  - 13.1.2 SNMP View
    233
  - 13.1.3 SNMP Group
    233
  - 13.1.4 SNMP User
    235
  - 13.1.5 SNMP Community
    237
- 13.2 Notification
  239
  - 13.2.1 Notification Config
    239
  - 13.2.2 Traps Config
    240
- 13.3 RMON
  243
  - 13.3.1 History Control
    243
  - 13.3.2 Event Config
    244
  - 13.3.3 Alarm Config
    245
Chapter 14 LLDP
247
- 14.1 Basic Config
  250
  - 14.1.1 Global Config
    250
  - 14.1.2 Port Config
    251
- 14.2 Device Info
  252
  - 14.2.1 Local Info
    252
  - 14.2.2 Neighbor Info
    253
- 14.3 Device Statistics
  254
Chapter 15 Cluster
257
- 15.1 NDP
  258
  - 15.1.1 Neighbor Info
    258
  - 15.1.2 NDP Summary
    259
  - 15.1.3 NDP Config
    260
- 15.2 NTDP
  262
  - 15.2.1 Device Table
    262
  - 15.2.2 NTDP Summary
    263
  - 15.2.3 NTDP Config
    264
- 15.3 Cluster
  266
  - 15.3.1 Cluster Summary
    266
  - 15.3.2 Cluster Config
    268
  - 15.3.3 Member Config
    271
  - 15.3.4 Cluster Topology
    272
Chapter 16 Maintenance
274
- 16.1 System Monitor
  274
  - 16.1.1 CPU Monitor
    274
  - 16.1.2 Memory Monitor
    275
- 16.2 Log
  275
  - 16.2.1 Log Table
    276
  - 16.2.2 Local Log
    277
  - 16.2.3 Remote Log
    277
  - 16.2.4 Backup Log
    278
- 16.3 Device Diagnostics
  279
- 16.4 Network Diagnostics
  280
  - 16.4.1 Ping
    280
  - 16.4.2 Tracert
    281
Chapter 17 System Maintenance via FTP
282
Appendix A: Specifications
286
Appendix B: Configuring the PCs
287
Appendix C: 802.1X Client Software
292
Appendix D: Glossary
300

Fiche De Données

Taille:

4,7 Mo
Pages:

303
Language:

English

Ouvrir le manuel

Manuel D’Utilisation

Table des matières

Package Contents
9
Chapter 1 About this Guide
10
- 1.1 Intended Readers
  10
- 1.2 Conventions
  10
- 1.3 Overview of This Guide
  10
Chapter 2 Introduction
14
- 2.3.1 Front Panel
  15
- 2.3.2 Rear Panel
  16
Chapter 3 Login to the Switch
17
- 3.1 Login
  17
- 3.2 Configuration
  17
Chapter 4 System
19
- 4.1 System Info
  19
  - 4.1.1 System Summary
    19
  - 4.1.2 Device Description
    21
  - 4.1.3 System Time
    22
  - 4.1.4 System IP
    23
- 4.2 User Manage
  24
  - 4.2.1 User Table
    24
  - 4.2.2 User Config
    25
- 4.3 System Tools
  26
  - 4.3.1 Config Restore
    26
  - 4.3.2 Config Backup
    27
  - 4.3.3 Firmware Upgrade
    27
  - 4.3.4 System Reboot
    28
  - 4.3.5 System Reset
    28
- 4.4 Access Security
  29
  - 4.4.1 Access Control
    29
  - 4.4.2 SSL Config
    31
  - 4.4.3 SSH Config
    32
Chapter 5 Switching
38
- 5.1 Port
  38
  - 5.1.1 Port Config
    38
  - 5.1.2 Port Mirror
    39
  - 5.1.3 Port Security
    41
  - 5.1.4 Port Isolation
    42
- 5.2 LAG
  44
  - 5.2.1 LAG Table
    44
  - 5.2.2 Static LAG
    46
  - 5.2.3 LACP Config
    47
- 5.3 Traffic Monitor
  49
  - 5.3.1 Traffic Summary
    49
  - 5.3.2 Traffic Statistics
    50
- 5.4 MAC Address
  51
  - 5.4.1 Address Table
    52
  - 5.4.2 Static Address
    54
  - 5.4.3 Dynamic Address
    55
  - 5.4.4 Filtering Address
    57
Chapter 6 VLAN
59
- 6.1 802.1Q VLAN
  60
  - 6.1.1 VLAN Config
    61
  - 6.1.2 Port Config
    64
- 6.2 MAC VLAN
  66
  - 6.2.1 MAC VLAN
    66
  - 6.2.2 Port Enable
    67
- 6.3 Protocol VLAN
  68
  - 6.3.1 Protocol VLAN
    69
  - 6.3.2 Protocol Template
    69
  - 6.3.3 Port Enable
    70
- 6.4 Application Example for 802.1Q VLAN
  71
- 6.5 Application Example for MAC VLAN
  72
- 6.6 Application Example for Protocol VLAN
  74
- 6.7 VLAN VPN
  76
  - 6.7.1 VPN Config
    77
  - 6.7.2 VLAN Mapping
    77
  - 6.7.3 Port Enable
    78
- 6.8 GVRP
  80
- 6.9 Private VLAN
  83
  - 6.9.1 PVLAN
    87
  - 6.9.2 Port Config
    88
- 6.10 Application Example for Private VLAN
  90
Chapter 7 Spanning Tree
92
- 7.1 STP Config
  97
  - 7.1.1 STP Config
    97
  - 7.1.2 STP Summary
    99
- 7.2 Port Config
  100
- 7.3 MSTP Instance
  102
  - 7.3.1 Region Config
    102
  - 7.3.2 Instance Config
    103
  - 7.3.3 Instance Port Config
    104
- 7.4 STP Security
  106
  - 7.4.1 Port Protect
    106
  - 7.4.2 TC Protect
    109
- 7.5 Application Example for STP Function
  110
Chapter 8 Multicast
114
- 8.1 IGMP Snooping
  116
  - 8.1.1 Snooping Config
    117
  - 8.1.2 Port Config
    118
  - 8.1.3 VLAN Config
    119
  - 8.1.4 Multicast VLAN
    121
- 8.2 Application Example for Multicast VLAN
  123
- 8.3 Multicast IP
  124
  - 8.3.1 Multicast IP Table
    125
  - 8.3.2 Static Multicast IP
    125
- 8.4 Multicast Filter
  127
  - 8.4.1 IP-Range
    127
  - 8.4.2 Port Filter
    128
- 8.5 Packet Statistics
  129
Chapter 9 QoS
131
- 9.1 DiffServ
  134
  - 9.1.1 Port Priority
    134
  - 9.1.2 Schedule Mode
    135
  - 9.1.3 802.1P Priority
    136
  - 9.1.4 DSCP Priority
    137
- 9.2 Bandwidth Control
  139
  - 9.2.1 Rate Limit
    139
  - 9.2.2 Storm Control
    140
- 9.3 Voice VLAN
  142
  - 9.3.1 Global Config
    144
  - 9.3.2 Port Config
    144
  - 9.3.3 OUI Config
    146
Chapter 10 ACL
148
- 10.1 Time-Range
  148
  - 10.1.1 Time-Range Summary
    148
  - 10.1.2 Time-Range Create
    149
  - 10.1.3 Holiday Config
    150
- 10.2 ACL Config
  150
  - 10.2.1 ACL Summary
    151
  - 10.2.2 ACL Create
    151
  - 10.2.3 MAC ACL
    152
  - 10.2.4 Standard-IP ACL
    153
  - 10.2.5 Extend-IP ACL
    154
- 10.3 Policy Config
  155
  - 10.3.1 Policy Summary
    155
  - 10.3.2 Policy Create
    156
  - 10.3.3 Action Create
    156
- 10.4 Policy Binding
  158
  - 10.4.1 Binding Table
    158
  - 10.4.2 Port Binding
    158
  - 10.4.3 VLAN Binding
    159
Chapter 11 Network Security
163
- 11.1 IP-MAC Binding
  163
  - 11.1.1 Binding Table
    163
  - 11.1.2 Manual Binding
    164
  - 11.1.3 ARP Scanning
    166
  - 11.1.4 DHCP Snooping
    167
- 11.2 ARP Inspection
  173
  - 11.2.1 ARP Detect
    177
  - 11.2.2 ARP Defend
    178
  - 11.2.3 ARP Statistics
    179
- 11.3 IP Source Guard
  180
- 11.4 DoS Defend
  181
- 11.5 802.1X
  184
  - 11.5.1 Global Config
    188
  - 11.5.2 Port Config
    190
  - 11.5.3 Radius Server
    191
Chapter 12 SNMP
193
- 12.1 SNMP Config
  195
  - 12.1.1 Global Config
    195
  - 12.1.2 SNMP View
    196
  - 12.1.3 SNMP Group
    197
  - 12.1.4 SNMP User
    198
  - 12.1.5 SNMP Community
    200
- 12.2 Notification
  202
- 12.3 RMON
  204
  - 12.3.1 History Control
    205
  - 12.3.2 Event Config
    205
  - 12.3.3 Alarm Config
    206
Chapter 13 Cluster
209
- 13.1 NDP
  210
  - 13.1.1 Neighbor Info
    210
  - 13.1.2 NDP Summary
    211
  - 13.1.3 NDP Config
    213
- 13.2 NTDP
  214
  - 13.2.1 Device Table
    214
  - 13.2.2 NTDP Summary
    215
  - 13.2.3 NTDP Config
    217
- 13.3 Cluster
  218
  - 13.3.1 Cluster Summary
    218
  - 13.3.2 Cluster Config
    221
  - 13.3.3 Member Config
    223
  - 13.3.4 Cluster Topology
    224
- 13.4 Application Example for Cluster Function
  226
Chapter 14 Maintenance
229
- 14.1 System Monitor
  229
  - 14.1.1 CPU Monitor
    229
  - 14.1.2 Memory Monitor
    230
- 14.2 Log
  231
  - 14.2.1 Log Table
    232
  - 14.2.2 Local Log
    233
  - 14.2.3 Remote Log
    233
  - 14.2.4 Backup Log
    234
- 14.3 Device Diagnose
  235
  - 14.3.1 Cable Test
    235
  - 14.3.2 Loopback
    236
- 14.4 Network Diagnose
  237
  - 14.4.1 Ping
    237
  - 14.4.2 Tracert
    238
Chapter 15 System Maintenance via FTP
239
Appendix A: Specifications
244
Appendix B: Configuring the PCs
245
Appendix C: 802.1X Client Software
248
Appendix D: Glossary
256

Manuel D’Utilisation

Taille:

3,6 Mo
Pages:

259
Language:

English

Ouvrir le manuel

Manuel D’Utilisation

Table des matières

Manuel D’Utilisation

Taille:

4,7 Mo
Pages:

32
Language:

English

Ouvrir le manuel

Manuel D’Utilisation

Table des matières

Manuel D’Utilisation

Taille:

3,6 Mo
Pages:

259
Language:

English

Ouvrir le manuel

Manuel D’Utilisation

Table des matières

Package Contents
10
Chapter 1 About This Guide
11
- 1.1 Intended Readers
  11
- 1.2 Conventions
  11
- 1.3 Overview of This Guide
  11
Chapter 2 Introduction
15
- 2.1 Overview of the Switch
  15
- 2.2 Main Features
  15
- 2.3 Appearance Description
  16
  - 2.3.1 Front Panel
    16
  - 2.3.2 Rear Panel
    17
Chapter 3 Login to the Switch
18
- 3.1 Login
  18
- 3.2 Configuration
  18
Chapter 4 System
20
- 4.1 System Info
  20
  - 4.1.1 System Summary
    20
  - 4.1.2 Device Description
    22
  - 4.1.3 System Time
    22
  - 4.1.4 Daylight Saving Time
    23
  - 4.1.5 System IP
    24
- 4.2 User Management
  26
  - 4.2.1 User Table
    26
  - 4.2.2 User Config
    26
- 4.3 System Tools
  27
  - 4.3.1 Config Restore
    27
  - 4.3.2 Config Backup
    28
  - 4.3.3 Firmware Upgrade
    29
  - 4.3.4 System Reboot
    29
  - 4.3.5 System Reset
    30
- 4.4 Access Security
  30
  - 4.4.1 Access Control
    30
  - 4.4.2 SSL Config
    32
  - 4.4.3 SSH Config
    33
Chapter 5 Switching
39
- 5.1 Port
  39
  - 5.1.1 Port Config
    39
  - 5.1.2 Port Mirror
    40
  - 5.1.3 Port Security
    41
  - 5.1.4 Port Isolation
    43
  - 5.1.5 Loopback Detection
    44
- 5.2 LAG
  45
  - 5.2.1 LAG Table
    46
  - 5.2.2 Static LAG
    47
  - 5.2.3 LACP Config
    48
- 5.3 Traffic Monitor
  50
  - 5.3.1 Traffic Summary
    50
  - 5.3.2 Traffic Statistics
    51
- 5.4 MAC Address
  52
  - 5.4.1 Address Table
    53
  - 5.4.2 Static Address
    54
  - 5.4.3 Dynamic Address
    55
  - 5.4.4 Filtering Address
    57
Chapter 6 VLAN
59
- 6.1 802.1Q VLAN
  60
  - 6.1.1 VLAN Config
    61
  - 6.1.2 Port Config
    63
- 6.2 MAC VLAN
  65
  - 6.2.1 MAC VLAN
    66
  - 6.2.2 Port Enable
    67
- 6.3 Protocol VLAN
  67
  - 6.3.1 Protocol VLAN
    68
  - 6.3.2 Protocol Template
    69
  - 6.3.3 Port Enable
    70
- 6.4 Application Example for 802.1Q VLAN
  70
- 6.5 Application Example for MAC VLAN
  72
- 6.6 Application Example for Protocol VLAN
  73
- 6.7 VLAN VPN
  75
  - 6.7.1 VPN Config
    76
  - 6.7.2 VLAN Mapping
    76
  - 6.7.3 Port Enable
    77
- 6.8 GVRP
  79
- 6.9 Private VLAN
  82
  - 6.9.1 PVLAN Config
    86
  - 6.9.2 Port Config
    87
- 6.10 Application Example for Private VLAN
  89
Chapter 7 Spanning Tree
91
- 7.1 STP Config
  95
  - 7.1.1 STP Config
    95
  - 7.1.2 STP Summary
    97
- 7.2 Port Config
  98
- 7.3 MSTP Instance
  100
  - 7.3.1 Region Config
    100
  - 7.3.2 Instance Config
    100
  - 7.3.3 Instance Port Config
    102
- 7.4 STP Security
  103
  - 7.4.1 Port Protect
    103
  - 7.4.2 TC Protect
    106
- 7.5 Application Example for STP Function
  106
Chapter 8 Multicast
110
- 8.1 IGMP Snooping
  112
  - 8.1.1 Snooping Config
    113
  - 8.1.2 Port Config
    114
  - 8.1.3 VLAN Config
    115
  - 8.1.4 Multicast VLAN
    117
- 8.2 Application Example for Multicast VLAN
  119
- 8.3 Multicast IP
  120
  - 8.3.1 Multicast IP Table
    120
  - 8.3.2 Static Multicast IP
    121
- 8.4 Multicast Filter
  122
  - 8.4.1 IP-Range
    122
  - 8.4.2 Port Filter
    123
- 8.5 Packet Statistics
  125
- 8.6 Querier
  126
Chapter 9 QoS
128
- 9.1 DiffServ
  131
  - 9.1.1 Port Priority
    131
  - 9.1.2 DSCP Priority
    132
  - 9.1.3 802.1P/CoS Mapping
    133
  - 9.1.4 Schedule Mode
    134
- 9.2 Bandwidth Control
  135
  - 9.2.1 Rate Limit
    135
  - 9.2.2 Storm Control
    136
- 9.3 Voice VLAN
  138
  - 9.3.1 Global Config
    140
  - 9.3.2 Port Config
    140
  - 9.3.3 OUI Config
    142
Chapter 10 ACL
144
- 10.1 Time-Range
  144
  - 10.1.1 Time-Range Summary
    144
  - 10.1.2 Time-Range Create
    145
  - 10.1.3 Holiday Config
    146
- 10.2 ACL Config
  146
  - 10.2.1 ACL Summary
    146
  - 10.2.2 ACL Create
    147
  - 10.2.3 MAC ACL
    147
  - 10.2.4 Standard-IP ACL
    148
  - 10.2.5 Extend-IP ACL
    149
- 10.3 Policy Config
  151
  - 10.3.1 Policy Summary
    151
  - 10.3.2 Policy Create
    152
  - 10.3.3 Action Create
    152
- 10.4 Policy Binding
  153
  - 10.4.1 Binding Table
    153
  - 10.4.2 Port Binding
    154
  - 10.4.3 VLAN Binding
    154
- 10.5 Application Example for ACL
  155
Chapter 11 Network Security
158
- 11.1 IP-MAC Binding
  158
  - 11.1.1 Binding Table
    158
  - 11.1.2 Manual Binding
    159
  - 11.1.3 ARP Scanning
    160
  - 11.1.4 DHCP Snooping
    162
- 11.2 ARP Inspection
  167
  - 11.2.1 ARP Detect
    171
  - 11.2.2 ARP Defend
    172
  - 11.2.3 ARP Statistics
    173
- 11.3 IP Source Guard
  174
- 11.4 DoS Defend
  175
  - 11.4.1 DoS Defend
    177
  - 11.4.2 DoS Detect
    177
- 11.5 802.1X
  178
  - 11.5.1 Global Config
    182
  - 11.5.2 Port Config
    183
  - 11.5.3 Radius Server
    185
Chapter 12 SNMP
187
- 12.1 SNMP Config
  189
  - 12.1.1 Global Config
    189
  - 12.1.2 SNMP View
    190
  - 12.1.3 SNMP Group
    190
  - 12.1.4 SNMP User
    192
  - 12.1.5 SNMP Community
    194
- 12.2 Notification
  196
- 12.3 RMON
  197
  - 12.3.1 History Control
    198
  - 12.3.2 Event Config
    199
  - 12.3.3 Alarm Config
    199
Chapter 13 LLDP
202
- 13.1 Basic Config
  205
  - 13.1.1 Global Config
    205
  - 13.1.2 Port Config
    206
- 13.2 Device Info
  207
  - 13.2.1 Local Info
    207
  - 13.2.2 Neighbor Info
    208
- 13.3 Device Statistics
  209
Chapter 14 Cluster
212
- 14.1 NDP
  213
  - 14.1.1 Neighbor Info
    213
  - 14.1.2 NDP Summary
    214
  - 14.1.3 NDP Config
    215
- 14.2 NTDP
  217
  - 14.2.1 Device Table
    217
  - 14.2.2 NTDP Summary
    218
  - 14.2.3 NTDP Config
    219
- 14.3 Cluster
  221
  - 14.3.1 Cluster Summary
    221
  - 14.3.2 Cluster Config
    223
  - 14.3.3 Member Config
    226
  - 14.3.4 Cluster Topology
    227
- 14.4 Batch Management
  229
  - 14.4.1 Batch Management
    229
  - 14.4.2 Status
    229
  - 14.4.3 Time-Segment Config
    230
Chapter 15 Maintenance
232
- 15.1 System Monitor
  232
  - 15.1.1 CPU Monitor
    232
  - 15.1.2 Memory Monitor
    233
- 15.2 Log
  233
  - 15.2.1 Log Table
    234
  - 15.2.2 Local Log
    235
  - 15.2.3 Remote Log
    235
  - 15.2.4 Backup Log
    236
- 15.3 Device Diagnostics
  237
  - 15.3.1 Cable Test
    237
  - 15.3.2 Loopback
    238
- 15.4 Network Diagnostics
  238
  - 15.4.1 Ping
    238
  - 15.4.2 Tracert
    239
Chapter 16 System Maintenance via FTP
241
Appendix A: Specifications
245
Appendix B: Configuring the PCs
246
Appendix C: 802.1X Client Software
248
Appendix D: Glossary
256

Manuel D’Utilisation

Taille:

4,2 Mo
Pages:

259
Language:

English

Ouvrir le manuel

Manuel D’Utilisation

Table des matières

Manuel D’Utilisation

Taille:

4,2 Mo
Pages:

32
Language:

English

Ouvrir le manuel