Manuels d'utilisation pour Whirlpool 29-718

Table des matières

• front cover

  1
• before you start

  2
• tools and materials needed for installation

  2
• electrical requirements

  2
• venting requirements

  3
• now start

  3
  • 1 - disconnect and move range from cabinet for access

    3
  • 2 - determine which venting method you need to use

    3
  • 3 - remove vent baffle from range hood

    3
  • 4 - for vented system, turn baffle so "Vented" is shown

    3
  • 5 - remove knockout from the wiring opening

    3
  • 6 - remove terminal box cover from range hood

    4
  • 7 - lift the range hood into final position and center

    4
  • 8 - determine and mark a vertical centerline on the wall

    4
  • 9 - drill hole through cabinet or wall for wiring

    4
  • 10 - to vent through the roof or wall

    4
  • 11 - install ductwork through the vent opening

    4
  • 12 - attach damper to vent opening

    4
  • 13 - run wiring through wall or cabinets

    4
  • 14 - start screws through neck of each keyhole slot

    4
  • 15 - lift range hood into final position

    4
  • 16 - remove terminal box cover

    5
  • 17 - remove filter/light lens from range hood

    5
• non-vented installation

  5
  • 1 - check baffle on top "Non-vented" should be shown

    5
  • 2 - remove knockout from the wiring opening

    5
  • 3 - remove terminal box cover on range hood

    5
  • 4 - lift range hood into final position and center

    5
  • 5 - determine and mark a vertical centerline on wall

    5
  • 6 - drill hole through cabinet or wall for wiring

    5
  • 7 - replace terminal box cover. continue with step 13

    5
  • 8 - use & care information

    6
  • 9 - operation of range hood

    6
• if range hood does not operate

  7
• if you need assistance

  7
• if you need service

  7
• warranty

  7