Agilent Technologies N3280A Manuale Utente

 

6 – Language Dictionary

These commands determine what happens to the output current and current limit during a triggered event.

The output current and output current limit is unaffected when a trigger occurs.

The output current is set by the CURR:TRIG value when a trigger occurs.
The current limit is set by the CURR:LIM:TRIG value when a trigger occurs.

Command Syntax [SOURce:]CURRent:MODE <mode>, (@<channel list>)

[SOURce:]CURRent:LIMit:MODE <mode>, (@<channel list>)

Parameters FIXed  |  STEP

*RST Value FIXed

Examples CURR:MODE FIX,(@1)

CURR:LIM:MODE FIX,(@1)

Query Syntax [SOURce:]CURRent:MODE?  (@<channel list>)

[SOURce:]CURRent:LIMit:MODE?  (@<channel list>)

Returned Parameters <CRD>

This command sets the delay when [SOUR:]DEL:MODE is set to MANUAL. If an output is changed and
a subsequent measurement is requested, the measurement will be delayed to allow the output to settle.

Command Syntax [SOURce:]DELay[:TIMe] <Nrf+>, (@<channel list>)

Parameters 0 to 1000 (seconds)

*RST Value 0

Examples DEL .001,(@1)

Query Syntax [SOURce:]DELay[:TIMe]?  (@<channel list>)

Returned Parameters <NR3>

This command selects the source delay mode.

The dc source selects an appropriate delay for the present output voltage or current

The delay programmed by [SOURce:] will be used as the delay.

Command Syntax [SOURce:]DELay:MODE <mode>, (@<channel list>)

Parameters AUTO | MANual

*RST Value AUTO

Examples DEL:MODE AUTO,(@1)

Query Syntax [SOURce:]DELay:MODE?  (@<channel list>)

Returned Parameters <CRD>