Precor 303135-111 Manuale Utente

Operating and Maintaining the P80 Console

To clean the screen:



The manufacturer recommends diluting one part 91%

isopropyl alcohol solution in one part water, or using the

91% isopropyl alcohol solution in its original strength. Be

sure to follow the solvent manufacturer’s precautions and

directions when using any solvent.

CAUTION: Potentially hazardous situations associated with the

use of isopropyl alcohol may result in minor or moderate injury

and property damage. To avoid these situations, follow all

instructions and recommendations in the manufacturer’s Material

Safety Data Sheet and product label.

Important: Do not use any acidic cleaners. Doing so will weaken

the paint or powder coatings and void the Precor Limited

Warranty. Never pour water or spray liquids directly on the

console or console’s screen.



It is important to avoid using any corrosive chemicals on the

console or screen.



Always dampen the cloth and then clean the screen. Be sure

to spray the cleaning liquid onto the cloth, not the screen, so

that drips do not seep into the console.



Apply the cleaner with a soft, lint-free cloth. Avoid using gritty

cloths.

Changing the Belt (Newer Model AMT Only)

The AMT uses belts to provide motion. These belts eventually

wear and must be replaced.
When the belt stride count reaches 90 million, the message

BELTS MUST BE CHANGED SOON scrolls on the Welcome

screen. While this message appears, the AMT operates

normally.
Important: If this message displays on your AMT, please contact

Precor Customer Support for assistance.
When the belt stride count reaches 100 million (and the belt

has not been changed), the message

BELTS CHANGE

REQUIRED scrolls continuously on the Welcome screen. The

input keys are not functional and the user cannot enter values

or begin a workout until the belts are changed. Please contact

Precor Customer Support to schedule a belt change.