Cateye EC-C400 Manuale Utente

• Pulling on the spring lock pin will enable you to move the seat post

up or down. When the saddle is at the correct level for you, release
the knob and move the seat post slightly.

• A spring inside the spring lock pin will drive a pin into the nearest

hole in the seat  post, locking it in that position.

• The pitch of the seat post holes is 1" (approx. 25mm).

• Decide the approximate height by one of the 3 holes on the handle-

bar post, then fix the final position by adjusting the handlebar angle.

• Remove the handlebar post knob.
• Hold the handlebar post where one of the post holes meets the post

knob screw hole, and fasten the post knob securely.  It will be easier
to screw in if you slightly lift the handlebar post.

• The pitch of the handlebar post hole is 3" (approx. 76mm).

• When you turn the handlebar lever clockwise (when mounted), the

handlebar is loosened.  The lever turns idle when pulled downward.

• Rotate the handlebar and hold it at the desired angle.
• Turn the handlebar lever counterclockwise to fix the handlebar

angle.

Seat post

pitch 1”
(approx. 25mm)

Pull

Spring lock pin

Tighten

Loosen

Handlebar post

Handlebar post
knob

Handlebar

Tighten

Loosen

Idle

Handlebar lever