Sunwave Tech. SRC-3000b Manuale Utente
27
Chapter 4 Miscellaneous Settings
This chapter will tell you how to use transmission function,
setup the backlight, and adjust the beep.
setup the backlight, and adjust the beep.
4.1 Using the Transmission Function
The SRC-3000b can transmit customized data to another
SRC-3000b.
NOTE:
Before using this function to transfer data, you must
connect two SRC-3000b with SLC-2080 USB cable (optional
accessory). You can refer to Appendix B for more
accessory). You can refer to Appendix B for more
information about the cable.
1.
Press and hold
for 3
seconds to enter the
confirmation screen. You
only need to operate on the
only need to operate on the
programmed SRC-3000b.
2.
Press each number button
(2, 4, 6, 8) in any order until
they disappear and start to
use the function.
use the function.
3.
Press and to select the
icon
icon
. And then press
to begin the
transmission.
4.
During the transmission, the
LCD displays blank keys as
LCD displays blank keys as
shown in the illustration on
the next page.