Toshiba MV13Q41 Manuale Utente
14
Basic setup
Clock setting
The auto clock function will automatically set the built-in clock (Month, Day,
Year and Time) when the unit is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal for auto clock, the auto clock needs
several minutes to set itself.
Year and Time) when the unit is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal for auto clock, the auto clock needs
several minutes to set itself.
Preparation:
• Connect the antenna or cable system.
• If you use a cable box, turn it on.
• Plug the AC power cord to the AC outlet.
• If you use a cable box, turn it on.
• Plug the AC power cord to the AC outlet.
Auto clock setting
Make sure the unit is turned off.
• If you press POWER, the Auto Clock
set is not effective.
1
Press DISPLAY to check the clock on the
screen.
screen.
3
If the clock is not set, check the antenna
condition. The auto clock may not function
properly if the reception condition is not
good.
condition. The auto clock may not function
properly if the reception condition is not
good.
4
Auto clock adjustment
To set auto clock to OFF
The auto clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.
12:00 PM everyday if you turn off the unit.
• If you use a cable box and you want auto clock adjustment
to be performed, the cable box must be left on.
• The auto clock adjustment is not effective when there is a
difference of more than 5 minutes exists between the
built-in clock time and the actual time.
built-in clock time and the actual time.
When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want auto clock set (Adjustment):
But if you do not want auto clock set (Adjustment):
Press MENU, then press
B
or
A
to select
option.
1
Press
▲
or
▼
to select “AUTO CLOCK”.
2
Press
B
or
A
to select “OFF”.
3
Press MENU repeatedly until the menu
screen is cleared.
screen is cleared.
• When the AUTO CLOCK is set to
“OFF”, the auto clock adjustment
does not function.
does not function.
• Set the clock manually
16
.
4
CH 125
8 : 47
AM
MON
00 : 00 : 00 SP
Notes:
• If the unit does not operate properly, or No key operation
• If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity,
etc., may affect the player's operation. Disconnect the AC power
cord once, then connect it again.
etc., may affect the player's operation. Disconnect the AC power
cord once, then connect it again.
• If no buttons are pressed for more than 60 seconds, the menu
screen will return to normal TV operation automatically.
2
Wait at least three minutes and press POWER.
• Depending on the reception condition,
it may take approx. thirty minutes.
5S20101A [E]p13-17
12/16/04, 4:27 PM
14