Philips SVA102 Manuale Utente

When you put a tape in the VCR, the power will come on automati-
cally. If the tape’s record tab is missing, playback will begin. (If a timer
recording is set, you may have to press the POWER button to turn
on the VCR.  Make sure you turn off the VCR for the timer record-
ing later.  If you insert a tape without a record tab when the power
is off to set a timer recording, the VCR will eject the tape.)

When a tape is played, fast forwarded, or recorded to its end, the
VCR will rewind the tape to the beginning, eject the tape, and turn
itself off.  
If the real-time counter memory is set, the VCR will only rewind the
tape to the point at which the counter is set to zero, then stop. The
VCR will not eject the tape or shut itself off.

A tape can be ejected with the VCR power on or off (but the VCR
must be plugged in).  If a Timer Recording is programmed or has just
finished, a tape can only be ejected with the power on.  Be sure to
insert a tape for the Timer Recording, then turn off the VCR power.

The VCR automatically adjusts tracking to give you the best possible
picture quality. With some recordings, however, you may get a bet-
ter picture using the manual tracking controls (see below).

To adjust the tracking manually, press the CHANNEL (o/p) but-
tons on the VCR during playback.
NOTES:
•  Tracking is returned to automatic tracking adjustment when a tape is

•  Manual tracking will not operate when the VCR is in Still mode.
•  Use the CHANNEL (o/p) buttons on the VCR or on the remote con-