Agilent Technologies 8935 series e6380a Manuale Utente
Chapter 7
233
Configuration - Screens and Control Fields
Control Fields on the Configuration Screens
Ext Ref In
This field selects the reference frequency of the signal at the EXT REF
IN connector. You can select 1, 2, 5, or 10 MHz; 1x, 2x, 4x, 8x, or 16x
chip.
IN connector. You can select 1, 2, 5, or 10 MHz; 1x, 2x, 4x, 8x, or 16x
chip.
Operating Considerations
This signal is used as a reference for, and directly affects, these
functions:
functions:
RF Generator Frequency (including the Tracking Generator)
RF Frequency Counter
AF Frequency Counter
RF Analyzer Tune Frequency
Spectrum Analyzer Center Frequency
AF generators 1 and 2 are not affected by the external reference; they
use their own reference.
use their own reference.
See
FF at End
This field is used to specify if you want the printer to make a form feed
(blank page) at the end of printing.
(blank page) at the end of printing.
Screen(s) Where Field is Present
PRINTER CONFIGURE
FF at Start
This field is used to specify if you want the printer to make a form feed
(blank page) at the start of printing.
(blank page) at the start of printing.
Screen(s) Where Field is Present
PRINTER CONFIGURE
Firmware
This field displays the current firmware revision for your Test Set. The
revision number is automatically changed when updated firmware is
installed.
revision number is automatically changed when updated firmware is
installed.
Screen(s) Where Field is Present
INSTRUMENT CONFIGURE