Agilent Technologies 8935 series e6380a Manuale Utente
240
Chapter 7
C:\Spk\Ref\RefGuideRevE\Cnfgscrn.fm
Configuration - Screens and Control Fields
Control Fields on the Configuration Screens
Notch Coupl
This field selects if the
Notch Freq
setting of the AF ANALYZER
screen is coupled to the
AF Gen1 Freq
setting. When set to
None
, the
notch filter and AF generator 1 do not interact. When set to
AFGen1
(coupled), the settings track each other unless the AF generator’s
frequency is set outside the 300 Hz to 10 kHz limits of the notch filter.
frequency is set outside the 300 Hz to 10 kHz limits of the notch filter.
Screen(s) Where Field is Present
INSTRUMENT CONFIGURE
Number to Call
This field is used enter the dialing sequence to be used whenever the
modem originates a call. The maximum number of characters is 36.
modem originates a call. The maximum number of characters is 36.
This setting is retained when the instrument is turned off.
Screen(s) Where Field is Present
MODEM CONFIGURE
Opt CDMA TB
This control is provided for future enhancements. It must be set to
Internal
until options are available.
Screen(s) Where Field is Present
INSTRUMENT CONFIGURE
Parity
This field specifies the serial communication parity setting when using
the serial ports.
the serial ports.
This setting is retained when the instrument is turned off.
Operating Considerations
When in remote mode (
Remote Mode
field is set to
On
), this field is
inaccessible.
Screen(s) Where Field is Present
I/O CONFIGURE