Agilent Technologies 8935 series e6380a Manuale Utente
260
Chapter 8
C:\Spk\Ref\RefGuideRevE\Enc-dec.fm
Signaling Encoder and Decoder - Screens and Control Fields
Control Fields for the Signaling Encoder and Decoder
Control Fields for the Signaling Encoder and
Decoder
Decoder
AF Anl In
See
AFGen2 To
See
Arm Meas
Arm measurement prepares the decoder to be triggered by an incoming
signal when
signal when
Single
is selected. When selected, the
Status:
field
indicates
Armed
.
Screens Where Field is Present
SIGNALING DECODER (All Modes)
B/I Delay
Busy/idle delay determines the number of bits that are counted before a
busy/idle bit changes from the Idle state to the busy state. This function
is used with the
busy/idle bit changes from the Idle state to the busy state. This function
is used with the
WS Delay
and
1stBitDly
settings in the
Busy/Idle
field.
Screens Where Field is Present
SIGNALING ENCODER (Modes: AMPS-TACS, NAMP-NTAC)
Bursts
This field defines the number of times the message data is output when
Send
is selected. This function only works when the
Send Mode
field is
set to
Burst
.
Screens Where Field is Present
SIGNALING ENCODER (Modes: AMPS-TACS, NAMP-NTAC, DTMF)