Agilent Technologies E6380-90073 Manuale Utente
148
Chapter 1
GPIB Command Dictionary
CGENerator subsystem
:EBNO:LEVel <real number>
:EBNO:LEVel?
:EBNO:LEVel?
These commands set/query the level of the generator when it is in
Eb/No mode. This command utilizes the “Real Number Setting Syntax”
on page 299, but does not use the :STATe command.
Eb/No mode. This command utilizes the “Real Number Setting Syntax”
on page 299, but does not use the :STATe command.
Syntax
CGEN:EBNO:LEV <real number> !values from
−
5 to +25 dB
CGEN:EBNO:LEV?
Screen/field equivalent
:EBNO:LEV controls the generator’s level when the
Gen Mode
field on
the CDMA GENERATOR screen is set to
Eb/No
.
:EQFilter <string>
:EQFilter?
:EQFilter?
These commands set/query the setting of the equalization filter used to
create forward channel signals. This command is used when you want
to override the default setting (EQ In). The filter is bypassed for reverse
link signals and cannot be overridden. Therefore, this command is valid
only when the CGEN:DIR ‘Fwd’ command is used.
create forward channel signals. This command is used when you want
to override the default setting (EQ In). The filter is bypassed for reverse
link signals and cannot be overridden. Therefore, this command is valid
only when the CGEN:DIR ‘Fwd’ command is used.
Syntax
CGEN:EQF ‘EQ In’ !switches the Equalization filter in
‘Out’
!bypasses the Equalization filter
CGEN:EQF?
Screen/field equivalent
CGEN:EQF controls the
EQ In/Out
subfield of the
Gen Dir
field on the
CDMA GENERATOR screen. This field is displayed only when
Fwd
is
selected in the
Fwd/Rev
subfield.