Agilent Technologies E6380-90073 Manuale Utente
Chapter 1
171
GPIB Command Dictionary
CONFigure subsystem
:SPOR9|SPORT9|SB9|SP9:MODem:CONNect:RETRy
:SPOR9|SPORT9|SB9|SP9:MODem:CONNect:RETRy?
:SPOR9|SPORT9|SB9|SP9:MODem:CONNect:RETRy?
This command sets/queries the number of calls that will be tried before
an origination attempt is terminated. The total number of tries will be
the number entered in this field, plus one for the original attempt.
an origination attempt is terminated. The total number of tries will be
the number entered in this field, plus one for the original attempt.
Syntax
CONF:SPOR9:MOD:CONN:RETR <integer>
CONF:SPOR9:MOD:CONN:RETR?
Screen/field equivalent
CONF:SPOR9:MOD:CONN:RETR controls the
Retries
field on the
MODEM CONFIGURE screen when the
Serial Port
field is set to
Port 9
.
:SPOR9|SPORT9|SB9|SP9:MODem:CONFigure:UPDate
This command is used to send the modem configuration strings entered
in the CONF:SPOR9:MOD:CONF:STR1, STR2, and STR3 commands.
in the CONF:SPOR9:MOD:CONF:STR1, STR2, and STR3 commands.
Syntax
CONF:SPOR9:MOD:CONF:UPD
Screen/field equivalent
CONF:SPOR9:MOD:CONF:UPD controls the
Modem Configuration
field on the MODEM CONFIGURE screen when the
Serial Port
field
is set to
Port 9
.