Agilent Technologies E6380-90073 Manuale Utente
274
Chapter 1
GPIB Command Dictionary
MEASure subsystem
:OSCilloscope:MARKer:LEVel:VOLTs <meas cmnd>
:OSCilloscope:MARKer:LEVel:VOLTs?
:OSCilloscope:MARKer:LEVel:VOLTs?
These commands set/query the voltage measurement at the
oscilloscope’s marker position. For this measurement to be valid, you
must have Audio In, Audio Out, Ext Mod, or SSB Demod chosen as the
audio input (see AFAN:INP on page 59).
oscilloscope’s marker position. For this measurement to be valid, you
must have Audio In, Audio Out, Ext Mod, or SSB Demod chosen as the
audio input (see AFAN:INP on page 59).
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
not use the :METer command.
Syntax
MEAS:OSC:MARK:LEV:VOLT <meas cmd>
MEAS:OSC:MARK:LEV:VOLT?
Example
MEAS:OSC:MARK:LEV:VOLT?
Screen/field equivalent
MEAS:OSC:MARK:LEV:VOLT? reads the
Lvl
measurement field on
the SCOPE screen. The
AF Anl In
field on the AF ANALYZER screen
must be set to
Audio In
,
Audio Out
, or
Ext Mod
,
SSB Demod
to measure
voltage in this field.
:OSCilloscope:MARKer:TIME <meas cmnd>
:OSCilloscope:MARKer:TIME?
:OSCilloscope:MARKer:TIME?
These commands set/query the time elapsed from the trigger event to
the marker location.
the marker location.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
not use the :METer command.
Syntax
MEAS:OSC:MARK:TIME <meas cmd>
MEAS:OSC:MARK:TIME? !returns a real number
Example
MEAS:OSC:MARK:TIME? !displays the measurement
Screen/field equivalent
MEAS:OSC:MARK:TIME? reads the
Time
field on the
Marker
menu of
the SCOPE screen.