Agilent Technologies E6380-90073 Manuale Utente
![Agilent Technologies](https://files.manualsbrain.com/attachments/f20ae6efbee7636e6d0d1a481fd9e3847e3caeb5/common/fit/150/50/991587f279eee8cef3aa0a068e5c2f53d86b00e1bf17fbcbf9a87aa49d96/brand_logo.png)
280
Chapter 1
GPIB Command Dictionary
MEASure subsystem
:SANalyzer:MARKer[:NORMal]:FREQuency <meas cmnd>
:SANalyzer:MARKer[:NORMal]:FREQuency?
:SANalyzer:MARKer[:NORMal]:FREQuency?
These commands set/query the frequency at the marker on the
spectrum analyzer’s trace.
spectrum analyzer’s trace.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
not use the :METer command.
Syntax
MEAS:SAN:MARK:NORM:FREQ <meas cmd>
MEAS:SAN:MARK:NORM:FREQ? !returns real value
Example
MEAS:SAN:MARK:NORM:FREQ? !returns the value
Screen/field equivalent
MEAS:SAN:MARK[:NORM]:FREQ? reads the
Freq
measurement field
on the SPEC ANL screen.
:SANalyzer:MARKer[:NORMal]:LEVel <meas cmnd>
:SANalyzer:MARKer[:NORMal]:LEVel?
:SANalyzer:MARKer[:NORMal]:LEVel?
These commands set/query the RF level at the marker on the spectrum
analyzer’s trace.
analyzer’s trace.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
not use the :METer command.
Syntax
MEAS:SAN:MARK:NORM:LEV <meas cmd>
MEAS:SAN:MARK:NORM:LEV? !returns real value
Example
MEAS:SAN:MARK:NORM:LEV? !returns the value
Screen/field equivalent
MEAS:SAN:MARK[:NORM]:LEV? reads the
Lvl
measurement field on
the SPEC ANL.