Agilent Technologies E6380-90073 Manuale Utente
![Agilent Technologies](https://files.manualsbrain.com/attachments/f20ae6efbee7636e6d0d1a481fd9e3847e3caeb5/common/fit/150/50/991587f279eee8cef3aa0a068e5c2f53d86b00e1bf17fbcbf9a87aa49d96/brand_logo.png)
86
Chapter 1
GPIB Command Dictionary
AFG2|ENCoder subsystem
:DTMF:STANdard <string>
:DTMF:STANdard?
:DTMF:STANdard?
These commands set/query the standard applied to the encoded data.
The standard affects the types of frames that can be sent, the range of
valid channel numbers, the encoding of the frame data, and the
interpretation of received frames.
The standard affects the types of frames that can be sent, the range of
valid channel numbers, the encoding of the frame data, and the
interpretation of received frames.
Syntax
AFG2:DTMF:STAN ‘Bell’
AFG2:DTMF:STAN?
Screen/field equivalent
AFG2:DTMF:STAN controls the
Standard
field on the SIGNALING
ENCODER screen when the
Mode
field is set to
DTMF
.
:DTMF:TWISt <real number>
:DTMF:TWISt?
:DTMF:TWISt?
These commands set/query the ratio of amplitudes (in dB) between the
high frequency and low frequency tone in each DTMF pair. A positive
twist value indicates a higher amplitude for the high frequency tone. A
negative value indicates a higher amplitude for the low frequency tone.
high frequency and low frequency tone in each DTMF pair. A positive
twist value indicates a higher amplitude for the high frequency tone. A
negative value indicates a higher amplitude for the low frequency tone.
Twist and pre-emphasis affect the relative levels of the high and low
tones within each symbol (tone pair). See the “Twist and Pre-emphasis”
in the Reference Guide for details about the interactions of twist and
pre-emphasis.
tones within each symbol (tone pair). See the “Twist and Pre-emphasis”
in the Reference Guide for details about the interactions of twist and
pre-emphasis.
This command utilizes the “Real Number Setting Syntax” on page 299,
but does not use the :INCR or :STATe commands.
but does not use the :INCR or :STATe commands.
Syntax
AFG2:DTMF:TWIS <real number>
AFG2:DTMF:TWIS?
Screen/field equivalent
AFG2:DTMF:TWIS controls the
Twist
field on the SIGNALING
ENCODER screen when the
Mode
field is set to
DTMF
.