Sony SU-FL62 Manuale Utente

7 

(GB)

If you intend to install a TV that is not specified on page 2, be 
sure to refer to the leaflet supplied with your TV.
For KDL-46X3500, KDL-46X3000, KDL-46W3000, KDL-
46V3000, KDL-40X3500, KDL-40X3000, KDL-40W3000, 
KDL-40V3000 users, the procedures for adjusting the 
position of the Support Frame are not necessary. Follow from 
part 3 of this Step.

Be careful not to drop the Beam and the Support Frame when 
detaching them.

Adjust the position of the 
Support Frame.
A

1

Attach the Support Frame to the Support Base 
matching the holes of the Support Frame to the pins 
of the Support Base, and secure the eight screws 
removed in part 1, as shown in the illustration.

2

Align hole “B” of the Beam and hole “B” of the 
Support Frame and secure with the four screws 
which were removed in part 1.

B

1

Reverse the Support Frame to make the “Y” 
marking face front. Then attach the Support Frame 
to the Support Base matching the holes of the 
Support Frame to the pins of the Support Base, and 
secure the eight screws removed in part 1, as shown 
in the illustration.

2

Align hole “C” of the Beam and hole “C” of the 
Support Frame and secure with the four screws 
which were removed in part 1.

When using an electric screwdriver, set the torque setting to 
approximately 1.5 N·m {15 kgf·cm}.

(Continued)