Agilent Technologies 2 Manuale Utente
![Agilent Technologies](https://files.manualsbrain.com/attachments/f20ae6efbee7636e6d0d1a481fd9e3847e3caeb5/common/fit/150/50/991587f279eee8cef3aa0a068e5c2f53d86b00e1bf17fbcbf9a87aa49d96/brand_logo.png)
2-11
Operation
Using Probes with an Agilent 83491A
To compensate for a passive probe
1
Connect the probe to the
Input connector on the Agilent 83491A clock recovery
module.
2
Attach the probe tip to the
CAL hook that is located near the floppy disk drive.
3
Press the reference receiver module’s front-panel channel
SETUP key.
4
Press
Calibrate and then Calibrate probe.
To compensate an Agilent 54701A active probe
1
Connect the Agilent 83491A output to the electrical measurement channel
input.
input.
2
Connect the probe to the
Input connector on the Agilent 83491A clock recovery
module.
3
Connect the probe power cable to the
Probe Power connector on the reference
receiver module.
4
Attach the probe tip to the
CAL hook that is located near the floppy disk drive.
5
Press the reference receiver module’s front-panel channel
SETUP key.
6
Press
Calibrate and then Calibrate probe.