American Dryer Corp. SL31AD-15 Manuale Utente
4
SECTION I
INTRODUCTION
The Phase 3 computerized system is a fully programmable, highly sophisticated dryer control system. ADC has
designed the Phase 3 to be the most versatile and reliable coin-op control system available.
designed the Phase 3 to be the most versatile and reliable coin-op control system available.
To eliminate as many moving parts as possible, ALL Phase 3 programming is done through the membrane
switch on the front of the control panel. The switch (PS) that puts the computer into the program mode is a
single, sealed, military specification toggle switch. This toggle switch (PS) eliminates the possibility of switch
failure due to an accumulation of lint or moisture.
switch on the front of the control panel. The switch (PS) that puts the computer into the program mode is a
single, sealed, military specification toggle switch. This toggle switch (PS) eliminates the possibility of switch
failure due to an accumulation of lint or moisture.
PHASE 3 FEATURES
Programmable
Changes in programs are made at the temperature selection keyboard (touch pad), and actual programs are
displayed for verification.
displayed for verification.
Adjustable Time
Programmable from a minimum of 1 minute to a maximum of 99 minutes in 1 minute increments.
Coin Acceptor Denominations
Values of the coin acceptors are programmable from a minimum of 1 to a maximum value of 9999 for any U.S.
or foreign coin denomination.
or foreign coin denomination.
Amount To Start
Programmable from a minimum value of 1 to a maximum value of 9999 in increments of one (1).
Accumulative Time
This program yields a specific value of time for any coin entry made after the “Amount To Start” has been
inserted.
inserted.
Accumulative Coin
This program selection requires that a specific value of coin(s) be inserted for additional time, programmable for
any minimum amount.
any minimum amount.
Coin Count
The number of coins inserted, including a separate display program for optional dual coin acceptors, can be
viewed through the Phase 3 computer’s light emitting diode (L.E.D.) display.
viewed through the Phase 3 computer’s light emitting diode (L.E.D.) display.