Profoto D1 1000 Air Manuale Utente

15

www.profoto.com

1.  Connect a sync cord from the camera to the Sync Connector [12] on the D1 unit.

1.  Press and hold down the Slave Button [8a] until the IR Indicator [8c] is illuminated.

Sync via radio (D1 without Profoto Air)

1.  Connect a Profoto Air Remote or Profoto Air Sync device (Receiver) with a cable to the 

Sync Connector [12] on the D1 unit.

2.  Follow the instructions for genera tors without built-in Profoto  Air receiver in the 

Profoto Air Remote/Profoto Air Sync User’s Guide.

Sync via radio (D1 with Profoto Air)

1.  Press and hold down the Slave Button [8a] until the RADIO Indicator [8b] is illuminated.
2.  Select radio channel by following the Radio settings instructions below.
3.  Connect a Profoto Air Remote or Profoto Air Sync device to the camera. 
4.  Follow the instructions for generators with built-in Profoto Air receiver in the Profoto 

Air Remote/Profoto Air Sync User’s Guide.

Radio settings (D1 with Profoto Air)

For sync via radio, the same radio channel has to be set on the D1 unit and the Profoto 

Air 

device or the Profoto Studio Air program.

For remote control using Profoto 

Air Remote, the same radio channel and group ha

ve to be 

set on the D1 unit and the Profoto 

Air device.

For remote control using Profoto Air USB and Profoto Studio Air, the same radio channel 
has to be set on the D1 unit and in the Profoto Studio 

Air program.

1.  Verify that the RADIO Indicator [8b] is illuminated on the D1 unit.
2.  Press the Channel Set Button [6].  The Display [1] will start flashing,  showing the 

current radio channel number to the left and the radio group letter to the right.

3.  While the Display [1] is flashing, turn the Setting Knob [7] clockwise to increase the 

radio channel number (1 to 8) and counter-clockwise to decrease the number.

4.  While the Display [1] is flashing, press and hold down and turn the Setting Knob [7] 

clockwise to increase the group letter (

A to F) and counter-clockwise to decrease the 

letter.

5.  Wait until the Display [1] stops flashing.

 (The Display [1] will no

w show the energy level 

of the flash light.)

For radio channel and group settings on the Profoto 

Air devices and the Profoto Studio 

Air 

program, please refer to the corresponding User’

s Guide.