Technicolor - Thomson VMD 6 Manuale Utente

EN

2

1

To clean the exterior, wipe gently with a soft
cloth.
Put the cloth in diluted mild soap and wring it
well to wipe off heavy dirt. Then wipe again
with a dry cloth.

Press PUSH OPEN and open the LCD monitor.
Wipe gently with a soft cloth.  Be careful not to
damage the monitor.  Close the LCD monitor.

To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.

To clean the viewfinder, raise it to the vertical
position.  Carefully open the cover  on the
bottom of the viewfinder 

1

.

Insert a lens blower or soft cloth into the gap at
the bottom of the viewfinder and clean the
interior of the viewfinder with it 

2

.

Close the cover. Tilt the viewfinder back to the
horizontal position.

● Avoid using strong cleaning agents such as benzine

or alcohol.

● Cleaning should be done only after the battery

pack has been removed or other power units have
been disconnected.

● Mould may form if the lens is left dirty.

● When using a cleaner or chemically treated cloth

refer to the cautions of each product.

Turn off the camcorder.

Slide and hold OPEN/EJECT in the direction of
the arrow, then pull the cassette holder cover
open until it locks. The cassette holder opens
automatically. Remove the cassette.

Press “PUSH HERE” to close the cassette holder.
•Once the cassette holder is closed, it recedes

automatically. Wait until it recedes completely
before closing the cassette holder cover.

Press BATTERY RELEASE and remove the battery
pack.

VMD6 EN(40/80)

28/08/00, 16:08

65