Lexicon BD-30 Manuale Utente

22

When the player is turned on for the first time, an Easy Setup 

Wizard screen will appear. It is a series of guided instructions 

designed to configure the basic settings for the player.
To start the Easy Setup Wizard, please follow these steps:
 

1)     Turn on the TV.

 

2)     Turn on the player.

 

3)      Switch the input selection on your TV so that the TV 

displays the signal from the player. You should see the 

first step of the Easy Setup Wizard.

If the Easy Setup Wizard has previously been completed or 

cancelled, it will no longer initiate when you turn on the player. 

Instead, you will see the background screen with the Lexicon and 

Blu-ray Disc logos. To access Easy Setup Wizard, please press the 
SETUP button on the remote control, select Device Setup, then 
Reset Factory Default. Select “OK” to confirm loading the factory 

default settings. Once the factory default settings are loaded, the 

Easy Setup Wizard will appear.

The first step of the Easy Setup Wizard gives you the opportunity 

to skip the entire wizard. If you are familiar with setting up audio/

video equipment and would like to customize the player settings 

using its Setup Menu, you may use the LEFT/RIGHT ARROW 

buttons to select the “Cancel” option, then press the ENTER key 

to exit the Easy Setup Wizard. Otherwise, to continue with the Easy 

Setup Wizard, select the “OK” option and press the ENTER key.

The player can output video through its HDMI and component 

output terminals. (Composite video output is also available but not 

recommended.) By setting the “Primary Video Output” option, 

the player can optimize video output of the selected terminal. The 

choices are “HDMI” and “Component”. If you connect the player 

to the TV using an HDMI cable (Method 1 on page 13, Method 2 

on page 14, or Method 4 on page 16), please select “HDMI”. If 

you connect the player to the TV using component video cables 

(Method 3 on page 15), please select “Component”. Please note: 

the best performance will be provided over the HDMI connection.
To make your selection, use the UP/DOWN ARROW buttons to 

highlight the choice, and then press the ENTER button to go to 

the next step. 

Easy Setup

The Easy Setup Wizard will help you configure the
basic settings for this player.  More detailed settings
can be accessed at the Setup Menu at any time after
finishing or exiting the wizard.

Press OK to initiate the Easy Setup Wizard, press
Cancel to exit this Wizard immediately.

Step: 1/6

Easy Setup

Previous

Next

Step: 2/6

Choose the primary video output that you use.

Better performance will be provided over an HDMI
connection.

Component

HDMI