Lucent Technologies 107970212 Manuale Utente

Initial Programming

You must perform the first two procedures for every installation. The procedure
for Outgoing Call Restriction is strongly recommended to ensure system
security. For the following procedures, you need to know the extension numbers
associated with the PARTNER MAIL VS system module. Figures 2-1 and 2-2
(in Chapter 2) show the possible extension numbers. For the extension numbers
appropriate to this installation, locate Form B1 of the System Planner  for the
communications system.

You must use this procedure to assign the extensions associated with the voice
messaging system module to Hunt Group 7. This Hunt Group, which is called
the VMS Hunt Group, is used exclusively for the voice messaging system.

Group 7:

1 .

2 .

3 .

4 .

5 .

6 .

7 .

8 .

9 .

10.

At extension 10*, press [ 

 ] [ 

 ] [ 

 ] [ 

 ] [ 

 ].

Enter the System Password, if required.

Press [ 

 ] [ 

 ] [ 

 ] [ 

 ].

At the 

Group: 

prompt, press [ 

 ].

At the 

Extension: 

prompt, enter the first PARTNER MAIL VS extension

Press [ 

 ] until the display reads 

1 Assigned.

Press [ 

 ] or [ 

 ] until the next PARTNER MAIL VS extension

Press [ 

 ] until the display reads 

1 Assigned.

If additional PARTNER MAIL VS extensions are shown on Form B1,
repeat Steps 7 and 8 for each one.

*

Some systems also allow programming from extension 11. Check the  Programming and Use
guide for the communications system.