GE TAD-732 Manuale Utente
12
7. Align the keyhole slots with the
mounting screws and slide the base
downward to secure it.
downward to secure it.
8. Plug the adapter into a standard AC
outlet. The TAD-732 beeps and
00
appears .
9. Plug the end of the modular cord
into a modular phone line jack.
10. Raise the base’s antenna to a verti-
cal position.
CONNECTING AND
CHARGING THE
HANDSET BATTERY
PACK
CHARGING THE
HANDSET BATTERY
PACK
The TAD-732 comes with a recharge-
able nickel-cadmium battery pack in the
handset but not connected. Before using
your phone, you must connect the bat-
tery pack and then charge it for about 15
hours.
able nickel-cadmium battery pack in the
handset but not connected. Before using
your phone, you must connect the bat-
tery pack and then charge it for about 15
hours.
1. Press down and slide off the battery
compartment cover.
2. Lift the battery pack out of the com-
partment, and plug its connector into
the socket inside the compartment.
The connector fits only one way.
the socket inside the compartment.
The connector fits only one way.
3. Put the battery pack in the compart-
ment and replace the cover.
4. To charge the battery pack, simply
place the handset on the base. The
CHARGE indicator on the base
lights.
CHARGE indicator on the base
lights.
43-732.fm Page 12 Friday, August 13, 1999 1:42 PM