Honeywell VISTA-50P Manuale Utente
– 58 –
Quick Guide To System Functions
FUNCTION
PROCEDURE
COMMENTS
Check Zones
Press [
✱].
To view faulted zones when is system not ready
Display All
Descriptors
Press and hold [
✱] for 5 seconds.
Displays all alpha descriptors programmed by
installer.
Arm System
Enter code.
Press arming key desired (AWAY,
Press arming key desired (AWAY,
STAY, INSTANT, MAXIMUM).
Arms system in mode selected.
Disarm System
Enter code. Press OFF [1].
Disarms system and silences alarms.
Bypass Zones
Enter code. Press BYPASS [6].
Enter zone numbers to be
Enter zone numbers to be
bypassed (use 3-digit entries).
Bypassed zones are unprotected and will not
cause an alarm if violated.
Quick Bypass
Enter code. Press BYPASS [6].
Press [#].
Press [#].
Bypasses all faulted zones automatically.
Chime Mode
Enter code. Press CHIME [9].
Keypad will sound if doors or windows are
violated while system disarmed.
Test Mode
Enter code. Press TEST [5]
Activates alarm sounder and allows sensors to
be tested.
View Messages
Press and hold [0] for at least 5
seconds.
Message from central station will appear.
View User
Capabilities
Enter user’s code. Press [
✱] + [✱].
Displays partitions & authority levels assigned
to the user.
GOTO Partition
Enter security code. Press [
✱].
Enter partition number (1-8).
0 returns to default partition.
0 returns to default partition.
Allows a user at one keypad to perform
functions in another partition, if that user is
authorized to do so.
authorized to do so.
Self-Help
Press and hold any function key for
at least 5 seconds.
Will display abbreviated instructions for the key
pressed.
Add a User
Enter master/manager code.
Press CODE [8].
Enter new user’s user number.
Enter code for that user.
Enter authority for that user in this
Press CODE [8].
Enter new user’s user number.
Enter code for that user.
Enter authority for that user in this
partition (1-5).
Follow prompts, 1=Yes, 0=No.
Master & Manager level users can add users to
the system, each with its own code and
authority level.
authority level.
Change a User’s
Code
Enter master/manager code.
Press CODE [8].
Enter user’s 3-digit number.
Enter new code for that user.
Press 0 (No) at prompt.
Press CODE [8].
Enter user’s 3-digit number.
Enter new code for that user.
Press 0 (No) at prompt.
Master & Manager level users can change their
own or other users’ codes.