Ironman Fitness V2 Manuale Utente
42
TO DELETE ALL REMOTES
1.
Set dipswitches 1 and 2 to on.
2.
Press the DELETE button.
3.
Now all the remotes that you wish to keep must be added
back in. Follow the procedure above To Add a New
Remote.
TO ADD A DETECTOR
1.
Set the dipswitch to on for the zone you wish to add.
I.e. To add a detector into zone 3, set dipswitch 3 to on.
2.
Press the ADD button
4.
Open the detector you
wish to add
If you are learning a Passive Infrared detector
1. Remove the front cover or press the tamper switch
then release. Learning mode will
timeout in 60
seconds
.
2. When the system has successfully received the
code from the detector, the siren will
beep the
number of times of the zone
that the detector has
been learnt into.
5.
Walk Test mode
The system will
automatically
enter
Walk Test mode.
During this time, the siren will beep the number of times of
the zone that has been triggered.
Label
the detector
with
its zone number for future reference. Detectors, which
have been set to 24 hour mode, will still trigger the alarm. If
a tamper switch is pressed on the main control unit or a
wireless detector the siren will sound a low tone beep.
ADD
A
DELETE
D