APC NBRK0570 Manuale Utente

Located in the lower-left hand corner of the interface, the Sensor Data pane displays the readings and 
alert status of sensors associated with the selected device in the Navigation pane. If the selected device is 
an output relay device, the state of the relay is displayed.

If the selected device features a large number of sensors, the sensors may be divided into sensor sets. Use 
the Set drop-down list to select either a specific sensor set or All Sensors.

Right-clicking on a sensor in the Sensor Data Pane reveals a drop-down menu with the following 
options:

Select this option to display the Sensor Configuration window, where you can modify the 
settings and thresholds for the available sensors.

•  View graph 

Select this option to display the Graph View pre-populated with the current sensor.

Select this option to display the History View pre-populated with the current sensor.

Use the Action/Information pane, located on the right-hand side of the interface, to view information and 
perform configuration tasks on your appliance and pods. The following views are available from the 
Action/Information pane: 

•  Camera View: This view displays live video captured by the appliance, cameras connected to the 

appliance, or IP cameras on your network that are shared through the appliance. You can listen to 
an audio stream from a selected camera pod or CCTV adapter pod and transmit audio from a 
microphone connected to a computer running Advanced View to a selected camera pod or CCTV 
adapter pod. If relay outputs are associated with a camera pod, buttons for each switch or relay 
appear on the camera image to which they correspond.

See “Output Control” on page 53.

•  Alerts View: This view displays alerts and resolved alerts reported by the appliance, any pods 

connected to the appliance, or any devices being monitored by scanners.

•  Maps View: This view displays maps that you configure for use with the appliance. A device with 

a red background has an alert status. A device with a green background has a status of OK.

•  Graph View: This view displays a graph of up to 24 hours of environmental data collected from 

any sensors or devices associated with an appliance.

•  History View: This view displays a historical set of data for a chosen appliance or sensor set. This 

data can be exported to a text file for import into another application.

•  Configuration View: Use this view to configure your appliance, pods connected to the appliance, 

and sensors, plus various other system settings and features.

•  About View: This view displays information about your appliance and all connected pods.