Hitachi N5009AF Manuale Utente

— 6 —

 ‑ Continued

Do not let visitors handle the Tool. All visitors should be kept 

away from work area.

Do not wear loose clothing or jewelry as they can be caught in 

moving parts. Rubber gloves and nonskid footwear are recom‑

mended when working indoors. Wear protective hair covering 

to contain long hair.

If a non relieving coupler is used on the Tool, the Tool can 

remain charged with air after disconnecting and thus will be 

able to drive a fastener even after disconnecting. The Tool and 

air hose must have a hose coupling such that all pressure is 

removed from the Tool when the coupling joint is disconnected.

Make sure the safety trigger operates properly.  Never use the 

Tool unless the safety trigger is operating properly, otherwise 

the Tool could drive a fastener unexpectedly. Do not tamper 

with or remove the safety trigger, otherwise the safety trigger 

becomes inoperable.

Keep all screws and covers tightly mounted. Check their condi‑

tion periodically. Never use the Tool if parts are missing or 

damaged. 

When loading fasteners into the Tool or when connecting the 

air hose, 

1) Do not contact the ram cap.

2) Do not depress the safety trigger; and

3) Keep the Tool pointed downward.

Never place your face, hands or feet closer than 8 inches (200 

mm) from discharge area. A serious injury can result if the fas‑

teners are deflected by the work piece, or are driven away from 

the point of entry.