Avalon Stoves 21 DV Fireplace Manuale Utente

© Travis Industries

100-01143

NOTE: The  combustible  area  above  the  facing  must  not  protrude  more  than  3/4"  from  the  facing.    If  it

does,  it  is  considered  a  mantel  and  must  meet  the  mantel  requirements  listed  in  this  manual.

Arched  Faces

35-1/2”

21-1/8”

Flush  w  base  of  fireplace

Arched  top  is  25-3/4”  radius

Bungalow,  T.  of  L.

35-3/

8”

21-1/8”

Flush  w  base  of  fireplace

Vict.  Lace

35-1/2”

21-1/8”

Flush  w  base  of  fireplace

Looking Glass

36-3/4”

23-1/2”

1-1/4” BELOW base of fireplace

Cast face is approx. 2” thick

Wilmington

36-3/4”

22-1/8”

1-1/4” BELOW base of fireplace

The facing (combustible 

or non-combustible) 

must maintain a 1/2” 

clearance to the sides 

and top of the fireplace.

Any material that protrudes 

more than 3/4” in front of the 

facing is considered a mantel 

and must meet the mantel 

requirements in this manual. 

4-3/4”

30-1/4”

(approx.)

3-3/8”

NOTE:  The facing tucks 

behind the flanges.

NOTE  The facing tucks under the notch at the front 

of the fireplace (3/8” above the base of the fireplace). 

Recommended Order of Installation We 

recommend installing the facing (drywall, tile) 

under the notch at the front of the fireplace 

(“a”) - then install the sides and top (“b” and 

“c”)

•

 

Facing  that  protrudes  in  front  of  the  face  above  the  face  (or  within  1/2”  of  each  side)  must  be
made  of  non-combustible  materials.

NOTE  A  3/8"  gap  above  the  face  is  required  for  face  installation  and  removal.