Monessen Hearth HBDV300 Manuale Utente

33

Log #1

Cover with 

Rock Wool 

Burner

 

1.  Make sure that the grate is hooked onto the rear 

bracket.

2.   Sprinkle the lava rocks around and in front of the burner 

at bottom of firebox.

3.  Place rock wool in a dime size pieces over the small 

holes and partially over large size holes. Do not place 
any over slots at rear of burner.  The rock wool over 
the large holes may need adjustment after firing the 
unit to establish yellow flame in the front. See Figure 
46.

4.  Place log #1 into place by setting the log over the two 

pins on the grate toward the back.  The two round holes 
on the bottom of the logs should go over the two pins 
on the grate. See Figure 47.

5.   Place log #2 into place by matching the two holes on 

the bottom of the log with the two pins located on top 
of the burner.  When this log is in place it is positioned 
at an angle and the right side of the log is seated over 
the right tong of the grate. See Figure 48.