Quadra-Fire 839-1290 Manuale Utente

Page 2

Quadra-Fire · Topaz · 7009-113E

        January 3, 2007

Hearth & Home Technologies welcomes you to our tradition 
of excellence!  In choosing a Quadra-Fire appliance, you 
have our assurance of commitment to quality, durability, 
and performance.

This commitment begins with our research of the market, 
including ‘Voice of the Customer’ contacts, ensuring we 
make products that will satisfy your needs. Our Research 
and Development facility then employs the world’s most 
advanced technology to achieve the optimum operation of 
our stoves, inserts and fi replaces.  And yet we are old-fash-
ioned when it comes to craftsmanship.  Each appliance is 

meticulously fabricated and gold and nickel surfaces are 
hand-fi nished for lasting beauty and enjoyment.  Our pledge 
to quality is completed as each model undergoes a quality 
control inspection.   From design, to fabrication, to shipping: 
Our guarantee of quality is more than a word, it’s Quadra-
Fire tradition, and we proudly back this tradition with a Lim-
ited Lifetime Warranty.  

We wish you and your family many years of enjoyment in 
the warmth and comfort of your hearth appliance.  Thank 
you for choosing Quadra-Fire.

With warm regards,

t

Senior

___________________________

___________________________

_________________________

___________________________

FAN TYPE VENTED CIRCULATOR Blower Electrical Rating115 V., 1.5 Amps, 60 Hz, 150 Watts

 

 

Input Rate on “HI” (BTU/Hr) 

39,500 

38,000 

Input Rate on “LO” (BTU/Hr) 

26,500 

30,500 

Main Burner Orifice 

.125 

.073 

Minimum Inlet Pressure (Inches W.C.) 

4.5” 

11” 

Maximum Inlet Pressure (Inches W.C.) 

7.0” 

14” 

Manifold Pressure on “HI” (Inches W.C.) 

3.5” 

10”

Efficiency up to  

85% 

85%

AFUE 74.75% 

76.40% 

This appliance equipped for altitudes 0-2000’ (0-610m) in USA; and in Canada for altitudes of 0-4500’ (0-1370m). In USA 
for Altitudes above 2000’, the vent configuration, orifice, or combination of both may need to be changed. See Owner’s 
Manual for information on making these changes.
This appliance must be installed in accordance with local codes, if any (and Commonwealth of Massachusetts approved); if 
none, follow the National Fuel Gas Code.  ANSI Z223.1 or Canadian Installation Codes, CAN/CGA-B149. Install and use only 
in accordance with manufacturer’s installation and operating instructions. NOTE: Have the gas supply line installed in accordance 
with local building codes by a qualified installer approved and/or licensed as required by the locality. (In the Commonwealth of 
Massachusetts, installation must be performed by a licensed plumber or gas fitter.)
This appliance must be installed in accordance with the current Standard CAN/CSA Z240 MH or with Manufactured Home Construction 
and Safety Standard, Title 24 CFR, Part 3280, or when such standard is not applicable, ANSI/NCSBCS A225.1/NFPA 501A, 
Manufactured Home Installation Standard.
WARNING: Do not operate the appliance until all sections have been assembled and installed in accordance with the manufacturer's 
instructions.

VENTED GAS APPLIANCE NOT FOR USE WITH SOLID FUEL VENTED GAS